Door Installation in Palm Beach - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Palm Beach

Door installation in Palm Beach runs $800 to $5,000 per opening depending on whether you’re replacing a standard entry door or setting a custom impact-rated terrace door into a 1920s Mediterranean Revival wall. Most standard doors go in same-day once your unit arrives; custom fabricated units from CGI, CWS, or Therma-Tru run four to six weeks before installation. If you’re calling from anywhere on the island, from the Estate Section down to South End, we answer live at (903) 354-7134 and we’ll give you a written price before any work starts.

Call (903) 354-7134

We’re Westlight Windows & Doors, an independently owned and operated Kingswell location led by Owen Satterfield. We’ve been installing doors since 2009, and we know what a Palm Beach opening actually requires: a unit that clears Florida’s coastal wind-load code and the Town’s Architectural Commission review at the same time. That’s not a standard door. That’s a specific door, spec’d correctly, documented properly, and installed so your insurer sees the compliance paperwork.

Why Westlight Windows & Doors Is Palm Beach’s Preferred Door Installation Company

Palm Beach homeowners call us because we’ve already navigated the hard part: ARCOM sight-line reviews, hollow-tile masonry jambs, and salt-exposed hardware on the Intracoastal side. Our crews serve Palm Beach directly from scheduling coordinated through our Miami-area office, so the people who show up know the difference between a stock Florida Product Approval door and one that will actually pass historic review off Via Mizner.

We put the Kingswell Guarantee on every job: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee handed to you at completion. If the work isn’t right within the guarantee period, our 365-Day Done Right Promise brings us back at no charge. No negotiating. No revised invoice at the door. Owen’s name is on the work, and he expects it done right the first time.

Every technician who walks through your door is background-checked and uniformed. You’ll know exactly who’s on your property, and they’ll leave the site cleaner than they found it. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.

Door Replacement in Palm Beach

Door Replacement in Palm Beach means removing a failed or outdated unit and setting a new one into an opening that was often built by hand in the 1920s or 1930s. The walls here aren’t wood-frame studs; many are hollow-tile masonry or stucco over masonry, which means shims, anchors, and jamb preparation work differently than they do on the mainland. A standard entry door replacement in Palm Beach runs $800 to $3,000 installed, while a custom-impact front door with sidelites can reach $4,000 to $5,000 or more depending on the profile details ARCOM requires.

Entry Doors for the Estate Section

Homes in the Estate Section and along Worth Avenue typically need doors with divided-lite patterns and slim sight lines that match the original Mizner-era profile. That usually means a custom or simulated-divided-lite impact door from CGI or CWS, not a stock unit off the shelf. We spec the frame, the glazing method, and the hardware finish to clear both wind-load code and architectural review the first time.

Front Doors That Meet Florida Code

Florida code requires every exterior door in Palm Beach to be impact-rated or protected by an approved shutter system, and most homeowners prefer the door itself carries the rating. Impact doors from manufacturers like Therma-Tru and CGI carry Miami-Dade NOA or Florida Product Approval numbers, and we document every configuration for your wind mitigation file.

Sliding Glass Door Replacement in Palm Beach

Sliding Glass Door Replacement in Palm Beach often means pulling a corroded aluminum slider from an ocean-facing wall and setting a new impact-rated unit that won’t bind, leak, or fog. On the Atlantic side, salt air eats aluminum tracks and roller hardware fast, and on the Intracoastal side, the brackish air from Lake Worth Lagoon does similar damage with less visibility. Most sliding glass door replacements here run $1,500 to $5,000 installed, with the higher end reflecting custom sizing, high design pressure ratings, and historic-profile glazing requirements.

Ocean-Facing Sliders

When we set a slider on the east side of the island, we isolate the threshold from the masonry and spec marine-grade hardware finishes to slow pitting and galvanic corrosion. The design pressure rating has to match the opening, and we verify the surrounding header and jamb can carry that load before the panel goes in. A cheap bid skips that verification, and that’s exactly how wind mitigation documentation fails at claim time.

Historic-Profile Sliders

ARCOM’s sight-line rules apply to sliding glass doors as much as to entry doors. Black rubber glazing gaskets visible from the street are a common rejection cause, so we spec thermally broken, narrow-profile impact frames with wet-glazed or concealed gaskets. The result is a slider that satisfies the Town’s review and still carries the wind-load rating your insurer wants documented.

Trusted Brands We Service in Palm Beach

We install products from eight manufacturer lines, including PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Palm Beach specifically, we keep relationships close with CGI and CWS for impact-rated doors that clear ARCOM’s sight-line review, and Therma-Tru for entry doors that balance profile authenticity with modern performance. Because we have access to the full Kingswell network’s inventory, we can source replacement parts and hardware for Palm Beach jobs faster than a single-brand shop could.

Common Door Installation Problems We See in Palm Beach Homes

• ARCOM glazing gasket rejections. A bidder quotes a stock Florida Product Approval door with black rubber gaskets visible from the street. The Town stalls the permit for months, and the redesign costs more than the original door. We spec concealed or wet-glazed gaskets from the start.
• Salt-corrosion on the Intracoastal side. Aluminum thresholds and hardware set directly against stucco without isolation begin pitting within a season or two. We use marine-grade finishes and isolate metal from masonry on every salt-exposed opening.
• Undocumented design pressure ratings. A contractor installs an impact panel without verifying the jamb and header can carry the wind load. The opening passes a product check but fails wind mitigation documentation. We verify the full assembly before the panel goes in.
• Hollow-tile masonry surprises. Homes built in the 1920s and 1930s have walls that don’t take standard anchors. We plan for masonry attachment from the beginning, not after the old door comes out and the wall shows its age.

Pricing for Door Installation in Palm Beach, FL

What Door Installation Costs in Palm Beach

Impact windows in Palm Beach generally run $800 to $1,500 per window installed, with impact single-hungs at $900 to $1,800 and large or custom openings at $2,500 to $5,000. Whole-home packages across a Palm Beach estate can run $8,000 to $25,000 or more. For doors specifically, expect $800 to $3,000 for a standard entry door and $1,500 to $5,000 for a sliding glass door that meets both code and ARCOM review.

The easiest way to get a real number is an in-home measure. We come to your home in Palm Beach, measure the openings, check the wind zone and exposure, and give you a written line-item quote before any work starts. Call (903) 354-7134 to schedule yours.

ARCOM, Wind-Load Code, and Your Insurance

Palm Beach’s Architectural Commission regularly rejects impact door units whose glazing gaskets are visible from the exterior, because Mizner-era openings were wet-glazed with putty and had razor-thin sight lines. So any door we set on the island must clear two reviews at once: Florida’s coastal wind-load code and the Town’s historic-preservation profile review. That dual requirement is the spine of our Door Installation work on the island.

What does that mean for your insurance? A compliant impact door with documented Miami-Dade NOA or Florida Product Approval numbers and verified design pressure ratings supports a wind mitigation inspection, which can reduce your windstorm premium. The insurance savings aren’t guaranteed, but the documentation is. We build that file for every Palm Beach job: product approvals, design pressure submittals, installation photos, and the final inspection record. You hand it to your insurer, and they see exactly what was installed and how it was verified.

On a 1930s Mediterranean Revival estate off Via Mizner near Worth Avenue, our crew replaced a failed original steel-framed terrace door set in hollow-tile masonry. We spec’d a thermally broken, narrow-profile impact door from CGI with a wet-glazed perimeter and concealed gasket to satisfy ARCOM’s sight-line review, then documented the Miami-Dade NOA and design pressure submittal for the owner’s wind mitigation file. The unit passed both the Town’s architectural approval and the final inspection without a redesign cycle, and the owner had the compliance paperwork in hand for their insurer before the stucco patch cured.

Florida Pays You Back

Florida has real incentives for impact-rated doors and windows, and they stack. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida also exempts impact-resistant windows and doors from sales tax. On the federal side, the 25C energy credit covers 30% of product cost, up to $600 per year on qualifying units. After a wind-mitigation inspection ($75 to $150), many homeowners see windstorm premium credits averaging around 25% on the windstorm portion. Programs and carriers set the final numbers, so we won’t promise a specific credit, but we’ll document everything your carrier needs to calculate it.

Impact windows beat hurricane shutters for most Palm Beach homeowners because the protection is permanent. There are no panels to haul out of a garage before a storm and no shutter tracks to corrode in salt air. The window itself carries the wind-load rating, and it’s doing its job every day, not just when a named storm is in the Atlantic.

Big-box retail installers sell a product. We sell a documented compliance package. The difference shows up when your insurer asks for proof or when ARCOM asks about your gasket profile. A licensed impact specialist who knows Palm Beach’s dual review process costs more upfront and saves you months of permitting stalls and insurance documentation gaps later.

We Also Serve Cities Near Palm Beach

We serve West Palm Beach, North Palm Beach, Greenacres, and Palm Beach Gardens with the same written-price guarantee and documented compliance approach. Even if you’re just over the bridge from Palm Beach, call us at (903) 354-7134 and we’ll coordinate a measure and a quote.

FAQs About Door Installation in Palm Beach