Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Wilton Manors
If you need door installation in Wilton Manors, FL, here’s the straight answer: a typical front entry door replacement runs $1,800-$3,500 installed, and a sliding glass door replacement runs $2,200-$4,800, with impact-rated HVHZ-compliant units at the higher end. We’re Westlight Windows & Doors, founded in 2009, an independently owned and operated Kingswell location, and our crews work in Wilton Manors every week. Because Wilton Manors sits inside Broward County’s High-Velocity Hurricane Zone, every door we install here must carry Florida Product Approval or a Miami-Dade NOA. No exceptions. That’s not an upsell; it’s the law. Call (903) 354-7134 and we’ll walk you through what your specific opening needs and what it costs, in writing, before any work starts.

Why Westlight Windows & Doors Is Wilton Manors’s Preferred Door Installation Company
Wilton Manors is a small city. Roughly two square miles. When we work on one home here, the neighbors notice. Our technicians show up in uniform, background-checked, and they know what HVHZ compliance actually requires in Broward County. That matters in Wilton Manors because nearly every house is a 1950s or 1960s CBS (concrete block) build, and those openings were never designed for today’s wind-load standards. Our Door Installation team measures every rough opening before we quote, so the price we put in writing is the price you pay. Owen Satterfield, who leads Westlight Windows & Doors, insists on that. A written price before any work starts. A real arrival window. A clean job site. And a written guarantee when we’re done. If it’s not right within the guarantee period, we come back at no charge. That’s the 365-Day Done Right Promise, and it’s on every job we do in Wilton Manors.
Door Replacement in Wilton Manors
Door Replacement in Wilton Manors almost always goes beyond swapping a slab in an existing frame. The original frames on 1950s and 1960s CBS homes were built for jalousie or single-pane aluminum units, and Broward County’s HVHZ code requires any replacement door to carry Florida Product Approval or a Miami-Dade NOA. That means new framing, new flashing, and a unit rated for the wind pressures this city actually sees, roughly 4 miles from the Atlantic and lined with salt-air canals. In Wilton Manors, a standard front entry replacement typically runs $1,800-$3,500 installed, depending on frame material, glass package, and whether the opening needs to be squared and re-flashed. We’ll give you the exact number before we start.
Steel and Fiberglass Entry Doors
Most Wilton Manors homeowners go with fiberglass or steel entry doors. Fiberglass handles the humidity and salt exposure near the Middle River canals better than wood, and it doesn’t warp in South Florida’s wet season. We install Therma-Tru entry doors with impact-rated glass packages when the opening calls for a decorative lite.
What the Permit Requires
Every door replacement permit in Wilton Manors requires a Florida Product Approval number specific to the exact door configuration. A cheap big-box unit without that number will fail inspection. We pull the permit, we schedule the inspection, and we close it out with approved documentation you can hand to your insurance carrier.
Sliding Glass Door Replacement in Wilton Manors
Sliding Glass Door Replacement in Wilton Manors is one of the most common jobs we do, because nearly every mid-century home here has at least one original aluminum slider facing a patio or canal. Those sliders corrode in the salt air, the rollers seize, and the single-pane glass offers no impact protection. Replacement runs $2,200-$4,800 installed in Wilton Manors for a standard 6-foot or 8-foot opening, with impact-rated laminated glass and anodized hardware on the upper end. The right slider here isn’t just a door. It’s the difference between a failed inspection and a closed permit.
Impact-Rated Sliders for HVHZ Compliance
A sliding glass door in Wilton Manors must carry HVHZ-specific Florida Product Approval or a Miami-Dade NOA. We install PGT and CGI impact sliders with laminated glass interlayers, and we set them in squared, re-flashed jambs. On a 1956 CBS ranch off NE 15th Avenue, we pulled an original aluminum slider and found the rough opening had been furred out for an earlier remodel. We squared and re-flashed the jamb before setting a PGT impact-rated sliding glass door with laminated glass interlayer glass and anodized hardware for the salt air. During the required HVHZ inspection the city flagged the adjacent original jalousie bath window, so we documented the non-compliant opening, added a matching impact unit, and closed the permit with the door and window on the same approved submittal.
Cooling Costs and Glass Packages
An impact slider with Low-E glass does two jobs at once. It meets the wind-load code and it cuts the heat gain that drives AC bills in Wilton Manors through the long summer. The laminated glass interlayer also blocks a good share of UV, which protects flooring and furniture near sun-facing patios.
Trusted Brands We Service in Wilton Manors
We carry eight manufacturer lines, so you’re not forced into one brand. For Wilton Manors homes, we typically recommend PGT or CGI for impact-rated sliders and entry units, ViewLux for contemporary door lines when the design calls for clean sightlines, and Therma-Tru for entry doors with decorative glass. Because we install these brands day in and day out, we can get accurate lead times and local parts without the guessing game. Door Installation in Wilton Manors is not a side business for us; it’s a core part of what we do as a Kingswell location serving South Florida.

Common Door Installation Problems We See in Wilton Manors Homes
- Non-compliant “hurricane” doors failing inspection: Too often we’re called after a contractor installed a wind-rated big-box door that didn’t carry the Florida Product Approval or Miami-Dade NOA required in Wilton Manors. The city fails it, and the homeowner pays twice: once for the wrong door, once for the right one.
- Original jalousie openings triggering a wider scope: Wilton Manors is almost entirely built out with 1950s and 1960s homes, and many still have jalousie louvers in bathrooms and utility rooms. When the inspector comes for your new front door, those openings get flagged as non-compliant under HVHZ rules, and the permit can’t close until they’re addressed.
- Salt-air corrosion on standard mill-finish aluminum: Homes 4 miles from the Atlantic and near the Middle River canals get constant salt and humidity exposure. Standard aluminum frames and hardware corrode prematurely. Marine-grade or anodized components aren’t a luxury here; they’re the only thing that lasts.
- Rough openings that have been modified by flips: Wilton Manors has an aggressive renovation culture. Frames and rough openings are often encountered mid-remodel, patched, furred out, or otherwise non-standard. A door that worked in the opening ten years ago may not fit today’s code-compliant unit without reframing and re-flashing.
Pricing for Door Installation in Wilton Manors, FL
Here’s what a door job costs in Wilton Manors. Front entry door replacement: $1,800-$3,500 installed. Sliding glass door replacement: $2,200-$4,800 installed. Large or custom openings with impact-rated units: $2,500-$5,000. Whole-home door packages with multiple openings: $8,000 and up. What moves the price? The size of the rough opening, whether the jamb needs reframing, the glass package, and the hardware finish. A marine-grade anodized finish costs more than mill aluminum but it’s the right call near the canals. We give every Wilton Manors homeowner a written line-item quote before any work begins, and we don’t revise it at the door. Call (903) 354-7134 to schedule a free in-home measure.
What Door Installation Costs in Wilton Manors
Expect to pay between $1,800 and $3,500 for a front entry door in Wilton Manors, and $2,200 to $4,800 for a sliding glass door, both installed and HVHZ-compliant. Impact single doors with decorative glass run $900-$1,800 for the unit alone, with installation adding on. Large or custom openings land at $2,500-$5,000. Whole-home packages across multiple openings run $8,000-$25,000 or more depending on how many openings and what glass package you choose. Opening count, wind zone, floor height, and frame material all move the price. We measure, quote, and hand you a written price. Free.
Florida Pays You Back
Florida has real incentives for impact-rated doors and windows, and Wilton Manors homeowners can stack them. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. The state also exempts impact-resistant windows and doors from sales tax. There’s a federal 25C energy credit worth 30% of product cost, up to $600 per year on qualifying units. And after a wind-mitigation inspection (typically $75-$150), many carriers credit around 25% off the windstorm portion of the premium. Numbers vary by carrier and program. We document every approval number and inspection result so you have what your insurer needs, and we never guarantee a specific credit. Your carrier sets the final number.
We Also Serve Cities Near Wilton Manors
Our crews cover Wilton Manors and the surrounding South Florida metros. If you’re in Miami, Hialeah, Fort Lauderdale, or Pembroke Pines, we handle Door Installation there too, with the same HVHZ-compliant approach and the same written-price promise. Call (903) 354-7134 for a free estimate anywhere in the area.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Wilton Manors
Yes. The door itself is the permitted scope, and Broward County requires every replacement door in Wilton Manors to carry HVHZ-specific Florida Product Approval or a Miami-Dade NOA, regardless of what the rest of the house has. The inspector won’t care that the windows are original; they’ll care that the new door meets current code. Call (903) 354-7134 if you want help figuring out what your specific door needs.
A compliant quote includes the exact Florida Product Approval or Miami-Dade NOA number for your door configuration, the permit fee, the inspection scheduling, and documentation you can hand to your insurer. Cheap quotes skip the approval number, skip the permit, and often leave the jalousie issue for you to discover when the city fails the inspection.
After a wind-mitigation inspection, most carriers apply a credit to the windstorm portion of your premium when they see documented impact-rated openings. The credit averages around 25% on that portion, though the carrier and your risk profile set the final number. We give you the approval numbers, the inspection results, and the documentation your insurer asks for.
Wilton Manors is almost fully built out with 1950s and 1960s homes, and many still have original jalousie louvers in bathrooms and utility rooms. When the city inspector comes for your new front door or slider, they typically flag those jalousie openings as non-compliant under HVHZ rules, and the permit can’t close until they’re addressed. That’s why we scope the whole opening picture up front.
Yes. An impact-rated sliding glass door with Low-E glass and a laminated interlayer meets Broward County’s HVHZ wind-load standards and reduces solar heat gain, which cuts cooling costs. The laminated glass also blocks a share of UV. We’ll spec the coating and interlayer for your patio’s sun exposure and your budget. Call (903) 354-7134 and we’ll come measure. The estimate is free.
Written by Owen Satterfield, Owner at Westlight Windows & Doors, serving Wilton Manors since 2009.










Before
After
Before
After
Before
After