Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Inverness
Window installation in Inverness carries a set of conditions most Bay Area contractors never deal with. Persistent marine fog off Point Reyes, wind funneling through the headlands, and salt air from Tomales Bay chew through ordinary window components in a few seasons. Our crews know Inverness streets from Sir Francis Drake Boulevard to the lanes above the bay, and we quote every job with those conditions in mind. Call (903) 354-7134 for a free estimate, and you’ll get a written price before any work starts.

Why Westlight Windows & Doors Is Inverness’s Preferred Window Installation Company
Westlight Windows & Doors was founded in 2009 and operates as an independently owned Kingswell location, led by Owen Satterfield. Owen built the company around a simple idea: put the price in writing, show up in the window you gave, and come back if the work fails. That promise travels well to Inverness, where homeowners have seen too many inland contractors quote low, show up late, and disappear when the fog rots a sill twelve months later.
Every Inverness job gets the Kingswell Guarantee: a written price before work begins, a committed arrival window, a clean job site, and a written warranty on the completed installation. If a repair fails within the guarantee period, we return and correct it at no charge. Our technicians are background-checked and uniformed, so you know exactly who’s walking up the drive. And when you call, a live person answers. Not a voicemail box, not a chatbot. Day or night.
We’ve worked on original 1920s cottages near the bay and newer homes up in Inverness Park. The housing stock varies, but the salt air and wind corridor are the same. That local familiarity means we arrive knowing what to look for before we pull the first sash.
Double Hung Windows in Inverness
Double Hung Windows are the workhorse of Inverness homes, both the original wood-sash cottages and the newer builder-grade builds scattered through Inverness Park and along Sir Francis Drake Boulevard. A double hung has two operable sashes that slide vertically, which makes it easy to clean and gives you control over airflow on days when the fog burns off and the house needs to breathe. In Inverness, the most common reason we replace them is jamb corner rot and warped vinyl sashes that no longer seal against the wind. A typical double hung window installation in Inverness runs $650-$1,150 per opening installed, depending on size, frame material, and glass package.
Marine-Grade Frames and Hardware
The standard vinyl frame an inland builder installs won’t survive the Point Reyes salt-air corridor. We specify fiberglass or marine-rated vinyl frames with stainless hardware on Inverness double hungs. The cost difference is modest, usually $120-$200 per window, and it buys a decade more service life in this climate.
Matching Original Cottage Proportions
Many original Inverness cottages have unusual sash proportions. Off-the-shelf double hungs won’t fit without modifying the rough opening, which can trigger a Coastal Development Permit. We measure every opening and order custom sizes where needed, so the exterior profile stays unchanged and the permit stays unnecessary on like-for-like swaps.
Vinyl Windows in Inverness
Vinyl Windows are the most affordable replacement option for Inverness homes, but the grade of vinyl matters more here than almost anywhere else in Marin County. Standard builder-grade vinyl sashes warp within a few fog seasons because the material expands and contracts badly in the damp, salt-heavy air off Tomales Bay. A properly specified vinyl window installation in Inverness runs $550-$950 per opening installed, using marine-rated vinyl with reinforced corners and stainless hardware. Cheap vinyl fails fast here. The right vinyl, specified for a coastal zone, performs well and lasts.
When Vinyl Makes Sense
For a guest cabin, a rental property, or a home where budget is the deciding factor, marine-grade vinyl is a sound choice. We recommend it for secondary structures and non-critical exposures, with one caveat: the weatherstripping must be upgraded to a closed-cell foam rated for salt air. Standard foam compresses and fails in two to three seasons.
What We Avoid in the Fog Corridor
We won’t install the cheapest white vinyl on a west-facing Inverness elevation. The wind-driven fog finds every seam, and within a year you’ll see condensation between panes or a sash that sticks. For west-facing walls that catch the full Point Reyes wind, we steer homeowners toward fiberglass or a laminated glass package. It costs more up front and avoids a second replacement five years down the road.

Trusted Brands We Service in Inverness
Westlight Windows & Doors installs products from eight manufacturer lines, so the product is matched to the job rather than the other way around. For Inverness conditions, we lean on PGT and CGI for impact-rated and marine-grade frames, and ECO Window Systems for energy-efficient glass packages that hold up in the fog. Owen Satterfield chose these brands because they’ve proven themselves in coastal environments. We keep Inverness-relevant parts and hardware in stock, which shortens turnaround when a sash, operator, or weatherstripping set needs replacing. You’ll get a real product choice, not a one-brand pitch.
Common Window Installation Problems We See in Inverness Homes
- Builder-grade vinyl sashes warping in the fog. Inland builders put standard vinyl in newer Inverness Park homes because it’s cheap. Within two or three fog seasons, the sashes bow and the corners lose their seal. We replace them with marine-rated vinyl or fiberglass.
- Skipping the Marin County Local Coastal Program permit on a like-for-like swap. Homeowners replace one window without checking the coastal zone rules. The county flags the exterior change mid-install. We pull the permit before we touch the opening.
- Failed weatherstripping on original wood sashes. The 1920s-1960s single-pane windows throughout Inverness still have their original foam weatherstripping. It compresses in two or three seasons and lets wind-driven fog into the wall cavity, which rots the jamb and corrodes the hardware behind the trim.
- Aluminum frame corrosion near Tomales Bay. Homes close to the bay’s eastern shore often have aluminum frames. Salt air pits the metal, the corners corrode, and the glass eventually loses its seal. We replace these with fiberglass or marine-rated vinyl before the wall framing is damaged.
Pricing for Window Installation in Inverness, CA
Across Inverness, most single-window replacements run $550-$1,150 installed, depending on the window type, frame material, glass package, and whether a Coastal Development Permit is required. Double hung windows run $650-$1,150. Vinyl replacements run $550-$950. Bay and bow windows run higher, typically $2,800-$4,600, and garden windows run $1,500-$2,400. The permit itself is a line item we handle for you, and it adds $400-$800 to the project when the county requires it. Every estimate is written, and the price does not change once you approve it. Call (903) 354-7134 and we’ll give you an exact number for your windows.
We Also Serve Cities Near Inverness
Our crews work throughout western Marin County. We regularly install windows in Petaluma, Novato, Cotati, and Fairfax, and we’re familiar with how the coastal permit rules and building stock differ from one town to the next. If you’re in Inverness or any nearby community, our Window Installation team can help. For a closer look at our work in this specific area, see Window Installation in Inverness.
Serving Inverness, CA - Our Local Coverage Area
We’re based in the Inverness area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Inverness
It can, even when the new window is the same size and style as the old one. Most Inverness parcels sit inside the Marin County Local Coastal Program coastal zone, and the county requires a Coastal Development Permit when the replacement changes the window’s exterior appearance, size, or rough opening. If the swap is truly like-for-like and the exterior profile stays unchanged, the permit is often avoidable, but you won’t know for sure until someone checks the parcel. We handle the permit research and filing as part of the job. Call (903) 354-7134 and we’ll check your address before any work is scheduled.
Marine-grade fiberglass or reinforced vinyl with stainless hardware and closed-cell foam weatherstripping are the realistic baseline for Inverness. Standard builder-grade vinyl warps within a few fog seasons, and aluminum pits. For west-facing elevations that catch the full wind, a laminated glass interlayer and low-E coating keep the frame and your interior both protected. We show you two or three product options per opening, with written line-item pricing, so you can see what the marine-grade upgrade costs before deciding. The estimates are free.
It shouldn’t, provided the exterior appearance and rough opening stay unchanged and the installation is done to the manufacturer’s spec. The risk comes when a homeowner changes the window size, the frame color, or the exterior trim profile, which can give the builder grounds to dispute unrelated warranty claims. We’ve done this on newer homes in Inverness Park, including one on Sir Francis Drake Boulevard where we pulled the Coastal Development Permit, kept the exterior look identical, and the builder warranty remained fully intact. Call us before you sign with any contractor, and we’ll walk you through what to protect.
Some newer Inverness neighborhoods have HOA architectural review requirements on top of the Marin County coastal permit. If your community requires approval before exterior changes, we’ll provide the product drawings and specifications the board needs. The sequence matters: HOA approval first, then the Coastal Development Permit, then installation. We handle both steps for you. It adds a week or two to the timeline, but it avoids a stop-work notice mid-install.
Start with the windows on the windward side, typically the west and southwest elevations facing Point Reyes. Those are the ones that fail first in the fog corridor. Vinyl windows and double hungs on those walls are the priority, because a failed seal there means moisture in the wall cavity and rot behind the trim. Interior doors, garden windows on sheltered east walls, and cosmetic trim can wait. The first upgrade should be the one that stops water from getting where it shouldn’t be. Call (903) 354-7134 for a free estimate and we’ll help you sequence the work in the order that protects the house.
Ready to get a written price for window installation in Inverness? Call (903) 354-7134 and ask for Owen. He’ll talk through your house, the conditions specific to your elevation, and what the permit situation looks like for your parcel. Every estimate is free, written, and firm. No door-step surprises, no revised invoices. Just straight answers and a price you can plan around.
Written by Owen Satterfield, Owner at Westlight Windows & Doors, serving Inverness since 2009.










Before
After
Before
After
Before
After