Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Window Company in Margate, FL
Window and door work in Margate is different from most of South Florida because nearly every home here falls under Broward County’s High-Velocity Hurricane Zone. That single fact changes everything about product selection, anchoring, and permitting. If you own one of the city’s thousands of 1960s and 70s concrete block homes with original aluminum frames, replacement is a code-driven job, not a cosmetic upgrade. Call (903) 354-7134 and we’ll walk you through what your house actually needs.
Why Margate Homes Are Different
Margate was largely built out between about 1960 and 1980, and the housing stock tells the story. Most homes are single-story CBS construction: concrete block with stucco over it, flat or low-pitch roofs, and small standardized window rough openings that were never designed for modern impact units. When we pull an original frame out of a Margate home, we’re usually looking at a masonry opening that needs anchor points spaced directly into the block, not a wood buck like you’d find in a frame-built house farther north.
The climate adds its own pressure. Margate sits 8 to 10 miles inland from the Atlantic, but there’s no elevation change to slow the wind down. The flat terrain means the city really does take the full design wind-speed load Broward County codes for 170+ mph HVHZ. Add subtropical humidity to that, and you get aluminum frames that corrode and non-impact glazing seals that fail years earlier than homeowners expect. The maintenance cycle here is shorter, and the replacement standard is higher. That combination is exactly why generic advice from out-of-county contractors falls apart on a Margate job.
Our Main Margate Services
Most Margate homeowners call us first about two things: replacing failed windows on aging CBS homes, and upgrading front or back doors for storm protection and energy performance. Here’s what each one looks like in this city.
Window Replacement in Margate
Replacement work in Margate often means removing original jalousie or single-pane aluminum windows and retrofitting a modern HVHZ-approved impact unit into an opening that was never sized for one. That’s a full-frame job most of the time, not an insert. We re-buck the block opening, anchor directly into the masonry, and install units from manufacturers like PGT and ES Windows that carry the approvals Broward County actually enforces. Window Replacement in Margate covers the process and pricing in detail.

Window Installation in Margate
New-construction and addition work in Margate runs into the same code wall as replacements do, but from a different angle: the opening gets built or re-framed to fit the impact unit rather than the other way around. We work with products from ECO Window Systems and CWS when energy efficiency is the priority, and we spec the anchoring and flashing to match masonry construction rather than wood frame. Window Installation in Margate explains what to expect on a new-opening job.

Door Installation in Margate
Door replacement here means the same HVHZ rules we apply to windows, plus a few more points of failure. Hinges, thresholds, and jamb anchoring all have to hold under design wind pressure, and in Margate’s humidity, a poorly flashed door rots or corrodes from the inside out. We install Therma-Tru entry doors and other lines selected for the opening, with anchored frames that meet Broward’s wind-load requirements. Door Installation in Margate walks through the options.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Margate
We carry eight manufacturer lines and pull the one that fits the opening and the job. For most Margate replacement work, that means impact-rated PGT on block homes and CGI where the homeowner wants a heavier coastal-rated frame. Parts are stocked locally, so a routine replacement doesn’t sit waiting on a freight truck. See our brands for the full line card.
Pricing for Window Company in Margate, FL
| Service | Typical range in Margate |
|---|---|
| Single window replacement (insert, standard size) | $450 – $1,100 installed |
| Full-frame window replacement with masonry re-anchoring | $1,100 – $2,400 per opening |
| Impact window replacement (PGT or ES Windows) | $1,400 – $3,800 per opening |
| Jalousie-to-impact full-frame tear-out and replacement | $1,600 – $3,400 per opening |
| Single door replacement (standard slab or pre-hung) | $750 – $2,000 installed |
| Impact-rated entry door with HVHZ anchoring | $1,900 – $4,200 installed |
| Interior door replacement (solid core) | $300 – $800 per door |
| Sliding glass door replacement (impact, standard 6-foot) | $2,200 – $4,600 installed |
| French door replacement (pair, impact-rated) | $2,800 – $6,500 installed |
What pushes the price up in Margate is the masonry work. Full-frame tear-outs on CBS openings, jalousie removal, and re-anchoring into block all add labor that a wood-frame neighborhood wouldn’t see. Whatever the job, you get a written price before any work starts, and it can’t change at the door.
Neighborhoods We Serve in Margate
We run crews throughout Margate, from the older CBS tracts near Margate Boulevard and State Road 7 up to the neighborhoods around Atlantic Boulevard and the eastern side of town. Our scheduling is coordinated from our South FL office, with crews dispatched directly to Margate addresses. Response time for an estimate is usually within a couple of business days.
- Margate Estates
- Carolina
- Fairway Estates
- Shadow Wood
- Holiday Springs
Service Area – Cities Near Margate
We also cover the corridor just west and south of Margate, including Coconut Creek, FL, Coral Springs, FL, Pompano Beach, FL, and Plantation, FL. If you’re in one of those cities and facing the same HVHZ requirements, the same pricing and written guarantee apply.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Company in Margate
Yes. Because Margate sits inside the HVHZ, every replacement window and exterior door must carry a Miami-Dade Notice of Acceptance or an approved Florida Product Approval, and the city requires a permit with inspection. We pull the permit, schedule the inspection, and the job closes only after it passes. Call (903) 354-7134 for a free estimate.
We typically get an estimator out within a couple of business days, and our phone line is answered by a real person 24/7 if you want to schedule. Once we’ve seen the openings and measured, your written price comes with a committed arrival window for the install date. Call (903) 354-7134 to set something up.
We’ll work with your HOA’s spec sheet if one applies, and we’ve installed across enough Margate communities to know which ones require board approval before a door or window style changes. The product approvals stay the same, but we’ll match the finish to the community’s rules. Call (903) 354-7134 and we’ll sort out what your HOA needs.
Call (903) 354-7134 to schedule your free estimate. We’ll give you a straight answer and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Margate Customers Say
"Replaced eight drafty old windows that were basically single pane. The house is warmer already and the street noise is way down. Crew was on time both days and the price was exactly the quote."
- Harold Bemis"Our energy bill in summer was brutal. New windows made a real dent in it. Salesman wasn't pushy and didn't do the fake "today only" discount thing the others tried."
- Bethany Oh"Two bedroom windows that never opened and one that wouldn't stay up. All replaced in an afternoon. The crew was clean, hauled off the old frames, and the quote held."
- Colette Rhee










Before
After
Before
After
Before
After