Therma-Tru Window Replacement Nationwide | Westlight Windows & Doors

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

Single hung
Single hung
Double hung
Double hung
Horizontal roller
Horizontal roller
Casement
Casement
Bay & bow
Bay & bow
Sliding glass doors
Sliding glass doors
Entry doors
Entry doors
Impact garage doors
Impact garage doors
PGT
PGT
CGI
CGI

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Therma-Tru Window Replacement: The Los Angeles Owner’s Guide

If you’re searching for Therma-Tru window replacement in Los Angeles, you likely have a sash, balance, or sealed glass unit that has failed and you want it matched, priced, and handled without a runaround. We stock Therma-Tru-compatible replacement components and install them across Los Angeles County, with most single-unit window replacements running $340-$780 installed depending on the part, glass package, and access. Most owners discover the problem the same way: a window that suddenly won’t stay up, condensation fog trapped between the panes, or a crank that spins without moving the sash.

Call (903) 354-7134

We are an independent window and door company, not affiliated with Therma-Tru, but we carry their product line and know these units well. Owen Satterfield, our owner, has been matching failed window parts to the right replacement since 2009, and our crews keep common Therma-Tru components on the truck so many Los Angeles jobs are finished in a single visit.

Which Therma-Tru Models This Applies To

Therma-Tru’s window line spans several series, and the part you need depends on which one your home has. We regularly work with their hinged patio, sliding, and awning window configurations, along with the sash packs and frame components used in their door sidelite and transom systems. The compatibility gotcha worth knowing: Therma-Tru sidelite windows on entry door units use different balance hardware than their standalone window series, so a part pulled from a standard window catalog won’t always fit a door sidelite. Our technicians confirm the series from the label etched on the corner of the glass or the sticker on the frame’s edge before ordering anything.

When it comes to OEM versus aftermarket, the honest answer is that it depends on the part. For sealed insulated glass units, we use Therma-Tru-spec glass packages so the low-e coating and argon fill match the original thermal performance. For balances, locks, and weatherstripping, quality aftermarket equivalents from established hardware manufacturers often equal or exceed the original at a lower cost, and we’ll tell you which route makes sense before any money changes hands. In Los Angeles, where UV exposure and coastal air put real stress on window seals, we lean toward glass packages rated for high solar gain rather than the cheapest possible option.

Signs Your Therma-Tru Window Replacement Is Failing

  • Fog or condensation between the glass panes. This means the seal on the insulated glass unit has failed and the argon or krypton fill has escaped. In Los Angeles, the cycle of hot days and cool nights accelerates seal failure, especially on south- and west-facing windows. The fix is a new sealed unit, not a repair.
  • The sash drops when you open it, or won’t stay in position. That’s a failed balance system. Therma-Tru sashes ride on spring-loaded balances or block-and-tackle assemblies, and when the spring loses tension or the shoe strips out, the window becomes a two-handed job. Replacing the balance pair, not just one side, prevents a lopsided sash and repeat failure.
  • The window is hard to close or drags against the frame. Warped vinyl or a misaligned sash often traces back to installation or settling. Sometimes a track cleaning and adjustment solves it. Other times the sash itself has twisted beyond tolerance and needs replacement. We’ll check the square of the frame before recommending either path.
  • You hear wind whistling or feel a draft even when the window is locked. The weatherstripping or the corner seals on the sash have compressed or cracked. While a new weatherstrip kit is inexpensive, a draft from the corners often means the sash frame has separated at a weld and the whole sash unit is due for replacement.
  • The lock or crank mechanism spins freely or grinds. Hardware failure on cranks and multi-point locks is common after years of use, especially in coastal Los Angeles neighborhoods where salt air corrodes internal gears. Replacement operators and lock sets are straightforward when matched to the correct Therma-Tru series, and we keep the most common versions stocked locally.

Replacement Cost & What’s Included

For a single Therma-Tru window replacement in Los Angeles, most jobs fall between $340 and $780 installed. Here’s what typically drives the range:

  • Sealed glass unit only: $340-$520 installed, depending on size, low-e coating, and whether argon fill is required.
  • Balance replacement (pair): $180-$320 installed, with the parts cost typically under $80 of that total.
  • Full sash replacement: $420-$780 installed, including the frame, glass, hardware match, and weatherstripping.
  • Hardware replacement (crank, lock, hinge): $150-$280 installed, depending on the specific component.

Every price you receive from us is written down before work begins. That’s the Kingswell Guarantee, and it applies to every single job we do in Los Angeles. No revised invoices at the door, no “discovered something” upcharges. If the work fails within our guarantee period, the 365-Day Done Right Promise means we come back and fix it at no charge. Call (903) 354-7134 for a free replacement estimate, and we’ll give you the line-item cost before anyone picks up a tool.

DIY or Call Us?

There are things an owner can safely check, and things that go wrong fast. You can confirm the model series from the corner etching on the glass, clean the track, and check whether the lock is engaging correctly. You should not attempt to replace a spring-loaded balance system or handle a sealed glass unit yourself. Those balance springs hold real tension, and a mishandled glass unit can shatter. When a homeowner in Los Angeles calls us after a DIY attempt, the repair usually costs more than if we’d done it from the start.

The honest split: if the issue is a dirty track or a loose screw on the lock plate, try that. If the sash is dropping, the glass is fogged, or the crank is shot, call (903) 354-7134. We’ll give you the price for the right parts before anyone makes a trip to your house.

FAQs

Need Windows & Doors help nationwide? Licensed & insured · Free in-home estimates response · free estimates
Call (903) 354-7134
Areas We Serve

Request a Free Estimate

Tell us what you need - Westlight Windows & Doors responds fast. No obligation.

By reaching out through this form, you confirm you have read our Privacy Policy and authorize us to contact you via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Now
Call Now - 24/7 Dispatch