Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Windows & Doors in San Francisco, CA | Westlight Windows & Doors
We’re an independent CGI service contractor covering San Francisco, and the short answer is this: we diagnose CGI-specific failures, replace fogged or failed glass, rebuild rotted frames under CGI units, and install new CGI windows and doors through our Window Installation in San Francisco, done the right way for coastal fog and historic-district rules. What makes our CGI work different here is that we know San Francisco’s pre-1915 housing stock and the Outer Sunset moisture cycle well enough to tell you honestly whether a repair will hold or whether you need full-frame replacement. Owen Satterfield leads our team, and he’ll tell you the straight cost range before anyone picks up a tape measure. Call (903) 354-7134 for a free estimate on any CGI window or door in San Francisco.
Why San Francisco Residents Choose Us for CGI Service
We’ve been installing and servicing CGI windows and doors across San Francisco for years as an independent trade contractor, not a manufacturer-authorized dealer. That independence matters more than most people realize. We can diagnose a CGI failure and spec the correct replacement unit without being locked into one product line or one answer. Owen Satterfield grew up watching his grandfather re-glaze windows on old craftsman bungalows in Los Angeles, then spent nearly two decades in the building trades before founding Westlight in 2009. That background is why we approach every CGI job in San Francisco by looking at the whole opening, not just the unit. We stock OEM CGI glass, gaskets, and hardware for units that are otherwise sound. We also keep coastal-rated aftermarket rollers, weatherstripping, and stainless fasteners on hand because San Francisco’s west side demands them. If you want straight talk on whether to repair or replace, call (903) 354-7134.
Common CGI Windows & Doors Problems We Solve in San Francisco
- Rolled or warped bottom sash rails on CGI vinyl double-hungs. San Francisco’s tall, narrow Victorian and Edwardian openings were originally sized for wood sash. When a dark-colored or heat-absorbing vinyl sash sits in those proportions, the bottom rail can warp from thermal gain. We see this regularly in south-facing units in the Mission and Noe Valley, and the fix is usually rail replacement or a full sash swap, not a band-aid.
- Fogged or failed insulated glass seals. The silica desiccant inside a CGI double-pane unit saturates over time, and once that happens, the glass fogs permanently. San Francisco’s marine fog layer in the Outer Sunset and Outer Richmond accelerates this because moisture is constantly pressing against the exterior glass. We replace the insulated glass unit with OEM CGI glass when the frame is still solid.
- Hollowed or rotten sill rails and stools under CGI replacement units. The original wood frame beneath a CGI insert was often never fully addressed. Fog sits against the glass each morning on the west side, water wicks into the old fir or redwood, and the damage is invisible until someone pokes a screwdriver through. We budget for full-frame replacement on nearly every Sunset Victorian job because repair is not the honest answer once rot has set in.
- Corrosion on CGI sliding-door tracks and rollers. Salt-laden Pacific air on San Francisco’s west side eats standard hardware. Stock CGI rollers and track components corrode faster than they would inland, which is why we commonly swap in stainless or coastal-rated aftermarket rollers and fasteners on slider doors and windows in the Outer Richmond and Outer Sunset.
- Air and water infiltration at bay window intersections. San Francisco’s projecting three-sided bay windows put CGI frame corners under constant stress from wind-driven fog and rain. We re-seal, re-flash, and where needed re-build the seat board and rough opening so the CGI unit isn’t fighting a failing frame.
CGI Service in San Francisco: What Local Conditions Mean for Your Equipment
Here’s the thing that a generic CGI page won’t tell you: San Francisco Planning Department design-review rules in designated historic districts, covering much of the Mission, Castro, Noe Valley, and Pacific Heights, require window and door replacements to closely match the original profile and appearance. That means a stock rectangular CGI vinyl unit is a non-starter in many of these neighborhoods. The original windows are tall, narrow double-hungs, and the entry doors are paired with transom lights. If you want CGI in a historic district, the unit has to be ordered or custom-built to match those proportions, not pulled off a shelf. The same rule applies to bay windows, which are ubiquitous here and almost never a standard size. On a ground-floor Edwardian flat in the Outer Sunset, our tech arrived to measure for CGI double-hung replacements and found the original sill rails and stools completely hollow under intact paint. The fog had been wicking moisture into the old frame for years. We switched the scope from insert replacements to full-frame CGI units with coastal-rated hardware and proper moisture barriers, and the owner’s morning condensation and drafts stopped within the first fog cycle. That’s what local knowledge actually buys you.
CGI Models & Products We Service in San Francisco
We service the full CGI line as an independent contractor, with deep hands-on time on these families specifically: CGI Sentinel vinyl single-hung and double-hung replacement windows, CGI horizontal roller sliders for stacked-flat openings, CGI clad-wood double-hungs sized to match Victorian and Edwardian jamb dimensions, and CGI entry door slabs and pre-hung replacement units with multi-point hardware. When a unit is otherwise sound, we use OEM CGI glass, gaskets, and hardware. But for San Francisco’s coastal conditions, we often recommend aftermarket stainless rollers, weatherstripping, and fasteners that outperform the stock components. For full details on what we carry and service, see our CGI sales & service page.
CGI Service Pricing in San Francisco
Most single CGI window glass replacements in San Francisco run $180 to $340 installed, depending on unit size and glass type. our Window Replacement in San Francisco for full-frame CGI units typically falls between $850 and $1,600 per opening, and that range shifts with historic-district custom sizing and any sill or jamb work the old frame needs. What drives cost here more than the CGI unit itself is what we find underneath: rot in the old fir or redwood frame, corroded hardware on the west side, or design-review requirements for custom profiles. Every estimate we give is a written line-item price before any work starts, and we don’t revise it at the door. Call (903) 354-7134 for an exact quote, free.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in San Francisco
Yes, but the CGI unit has to match the original profile and appearance closely enough to pass San Francisco Planning Department design review, which means custom-ordered tall, narrow double-hung units rather than stock rectangular vinyl. We handle the measuring, the ordering, and the paperwork side of the process. Call (903) 354-7134 and we’ll tell you what’s possible for your specific block.
The marine fog layer in the Outer Sunset and Outer Richmond presses moisture against exterior glass for hours every morning, and over years that saturates the silica desiccant inside the insulated unit and causes permanent fogging. Salt air accelerates frame and hardware corrosion at the same time. Coastal-rated hardware and proper moisture barriers slow this cycle considerably.
If the original sill rail and stool are solid, an insert replacement is often sufficient. If the old wood has been wicking fog moisture for years, it may be hollow under the paint, and a full-frame replacement is the only honest fix. We’ll tell you which one you need after we inspect the actual opening, not a photo. Estimates are free at (903) 354-7134.
We custom-order the CGI units to the bay’s actual dimensions and rebuild the seat board and rough opening as needed. San Francisco’s projecting three-sided bays are almost never standard, so this is routine work for us, not a special case. Call (903) 354-7134 and we’ll measure yours.
We use OEM CGI glass, gaskets, and hardware when the unit is otherwise sound and OEM is the better long-term choice. For San Francisco’s salt-air conditions on the west side, we often recommend aftermarket stainless rollers and coastal-rated weatherstripping because they outperform the stock components. We’ll show you the difference and let you decide.
Service Areas Near San Francisco
Beyond our San Francisco service area, we run crews in surrounding Bay Area communities and beyond. For CGI work further south, see CGI service in Fresno. For the Central Valley and capital region, see CGI service in Sacramento.
Book Your CGI Service in San Francisco Today
Tell me what you need, and I’ll tell you what it actually costs. That’s how Owen runs every San Francisco job, and it’s why our customers get a written price before any work begins. Call (903) 354-7134 now for a free estimate on CGI window or door service anywhere in San Francisco.
Written by Owen Satterfield, Owner at Westlight Windows & Doors, serving San Francisco since 2009.