Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Burbank
Door installation in Burbank runs $800 to $4,200 for most entry, storm, and sliding glass projects, depending on the opening’s condition once we get inside the wall. We’re the Door Installation team at Westlight Windows & Doors, an independently owned and operated Kingswell location, and we’ve worked on enough 1940s and 50s Burbank homes to know that the price on paper rarely matches what the framing actually reveals. Because so many houses here sit beneath Hollywood Burbank Airport’s Runway 15 approach corridor, jet vibration has spent decades working on door jambs, headers, and threshold seals in ways a house in Glendale never sees. That’s the real reason we treat every door replacement in Burbank as a small structural investigation, not a hardware swap. Call (903) 354-7134 and we’ll send a background-checked technician to your door with a written price before any work starts.
Why Westlight Windows & Doors Is Burbank’s Preferred Door Installation Company
We’ve been doing this since 2009, and Burbank homeowners keep calling us back because we do something most door companies won’t: we tell you what the job will actually cost before we start prying anything loose. The Kingswell Guarantee puts four promises in writing on every project: a written price before any work begins, a committed arrival window, a clean job site, and a written guarantee on the finished work. If a door repair fails within the guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s one of the reasons our Burbank customers tend to be repeat callers rather than one-time shoppers.
Our technicians arrive uniformed and background-checked, so you know exactly who’s walking through the door. We carry eight manufacturer lines, including PGT, CGI, and CWS, which means we match the product to the job instead of forcing a door into an opening it was never meant for. And when you call, a live person answers. Not a voicemail box, not a chatbot. Day or night, a real human picks up the phone at (903) 354-7134.
Key Takeaways for Burbank Homeowners
- Most Burbank door installations run $800 to $4,200 depending on the opening’s condition and whether reframing or electrical work is required.
- Airport-approach vibration from Hollywood Burbank Airport racks door jambs out of square over time, so a simple slab swap often becomes a reframing job once the old door comes out.
- Every quote from Westlight includes a written price, an arrival window, and a written guarantee before any work starts.
- If a repair fails within the guarantee period, we return and correct it at no charge under the 365-Day Done Right Promise.
Storm Door Installation in Burbank
Storm Door Installation in Burbank typically runs $800 to $1,900 installed, and in this climate it’s less about protecting against driving rain than it is about giving an older entry door a second line of defense against the valley heat trap and Santa Ana wind pressure. Burbank routinely tops 105°F in summer, and the seasonal Santa Anas create intense pressure cycling that shreds average weatherstripping and door sweep seals within a couple of seasons. A properly fitted storm door with compression seals rated for that kind of repeated load buys your main entry door years of extra life and keeps conditioned air from bleeding out around the threshold.
Custom Sizing for Older Openings
Most Burbank storm doors go onto 1940s and 50s ranch homes whose original door openings were never built to modern standard sizes. Off-the-shelf storm door kits from the home center rarely drop into these openings cleanly, and forcing them invites failed waterproofing at the sill within the first rainy season. We measure each opening to the sixteenth of an inch and order the storm door to fit what’s actually there, not what the manufacturer assumes is there.
When a Storm Door Makes Sense Here
If your entry door faces west or south into the afternoon sun, a storm door with low-e glass (a thin coating that reflects heat back into the room in winter and out in summer) will noticeably cut the heat load on your front hallway. It also gives you a true cross-breeze option during Burbank’s summer evenings when the airport noise makes opening the front door for ventilation less appealing than it sounds.
Sliding Glass Door Installation in Burbank
Sliding Glass Door Installation in Burbank typically runs $1,800 to $4,200 installed, and the honest number depends on what’s hiding in the wall behind your existing door or window. On streets north of Magnolia toward the airport, we routinely find headers that were undersized when the house was built and haven’t gotten any more square since decades of jet-approach vibration took their toll. A sliding glass door needs a level, properly supported header and a dead-flat sill track to operate smoothly for years. Cut corners on either and the door will bind, drag, or leak within months.
Permit-Driven Code Upgrades
Opening a Lockheed-era wall in Burbank to install a sliding glass door frequently exposes knob-and-tube wiring and framing that no longer meets current code. That triggers permit-driven upgrades a door-only quote never anticipated: a licensed electrician’s inspection, a reframed header, sometimes a shear wall detail the city requires for a wider span. We write these allowances into the contract up front as a line item, and any surprise we find gets priced and approved in writing before we touch it. You’ll never get a revised invoice at the door.
Why the Header Matters on These Blocks
Homes under the Runway 15 approach corridor north of Magnolia generate repeat calls for binding sliding doors and failed seals. The constant vibration from jet traffic accelerates frame fatigue in aging aluminum windows and doors, and the header carries that load transfer. If we don’t shore the opening and repack the threshold with compression seals and glazing tape rated for pressure cycling, the new door will start binding within a few seasons even if it slides perfectly at delivery.
Trusted Brands We Service in Burbank
We install and service doors from eight manufacturer lines, and for Burbank jobs we lean on three the most. PGT and CGI make impact-rated doors engineered to hold up under repeated pressure cycling, which matters on airport-adjacent blocks where ordinary seals fail early. CWS builds entry systems with beefier threshold hardware that stands up to Santa Ana wind loading. Because we’re a Burbank-serving Door Installation in Burbank crew with local stock access, we can typically have replacement parts and custom-ordered slabs in hand within a week to ten days, so a door that fails isn’t left swinging for a month.
Common Door Installation Problems We See in Burbank Homes
- Out-of-square jambs from jet vibration. Years of aircraft takeoff loads rack door openings enough that a new slab binds against the strike plate within months if the opening isn’t reframed. We check for square with a framing square before we order anything.
- Degraded door sweeps and weatherstripping. Burbank’s 105°F summers and Santa Ana pressure cycling cook and tear average seals faster than in coastal LA. We spec compression-rated seals, not the foam tape that fails in a season.
- Undersized headers hiding in 1940s and 50s walls. Opening a wall for a sliding glass door on a Magnolia Park or Rancho home often reveals a header that was barely adequate when the house was new, now decades past its useful span.
- Knob-and-tube wiring in jamb cavities. Pulling a door frame on older Burbank homes frequently exposes original wiring that no longer meets code. We build the electrician’s inspection allowance into every quote so the permit process doesn’t surprise you mid-job.
Pricing for Door Installation in Burbank, CA
A straightforward entry door swap in Burbank runs $800 to $1,600. A storm door runs $800 to $1,900. A sliding glass door runs $1,800 to $4,200, with the upper end reflecting reframing, header work, and code-triggered electrical upgrades on older openings. The single biggest price driver in Burbank is what’s behind the old door: a square, sound opening keeps you near the low end, while an out-of-square jamb or knob-and-tube wiring pushes you toward the middle or top. Every Westlight quote includes a written line-item breakdown before any work begins, and any added scope discovered mid-job gets priced in writing and approved by you before we proceed. Call (903) 354-7134 to schedule your free estimate.
We Also Serve Cities Near Burbank
We work throughout the San Fernando Valley and surrounding areas, serving homeowners in Glendale, West Hollywood, Altadena, and Beverly Hills. Whether your project is in Burbank proper or one of the neighboring communities, the same Door Installation standards apply: written prices, real arrival windows, and a guarantee that puts every promise on paper.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Burbank
Because Burbank’s housing stock was largely built between the 1940s and 1960s during the Lockheed boom, and walls from that era hide undersized headers, out-of-square framing, and original wiring that current codes don’t allow. A quote that never moves is usually a quote that never looked behind the trim. We write allowances into our contract for reframing and electrical inspections up front, and any added scope gets priced and approved in writing before we proceed. Call (903) 354-7134 for an exact quote, and know that the number on paper is the number you’ll pay unless you approve a change first.
Yes. Jet vibration from the Runway 15 approach corridor racks door jambs out of square over time and accelerates seal and weatherstripping failure. That’s why we inspect every opening for square before ordering a slab, and why we spec compression seals rated for the pressure cycling those blocks throw at door sweeps.
Yes, in most cases. A sliding glass door changes a wall opening, which triggers structural review and often electrical code compliance if knob-and-tube wiring is exposed. We handle the permit application and coordinate inspections, and our written quote includes the permit line item and any code-driven allowances. Call (903) 354-7134 and we’ll walk you through what your specific opening will require.
Yes, but only if the threshold and weatherstripping are sealed correctly and the door is squared to the opening. Burbank routinely tops 105°F in summer, and a door that leaks conditioned air around the threshold works against your AC all day. A properly fitted door with low-e glass and compression seals will make a measurable difference, especially on west and south-facing openings.
We look for out-of-square jambs, degraded header lumber, failed waterproofing at the sill, and exposed knob-and-tube wiring in the jamb cavity. On a 1948 ranch-style home off North Keystone Street near Magnolia Park, our crew pulled a failing steel casement and a warped entry door and found the frame a full quarter-inch out of square from decades of jet-approach vibration, with charred knob-and-tube wiring inside the jamb cavity. We shored the opening, wrote an allowance for reframing and a licensed electrician’s inspection, and the homeowner approved every added scope item in writing before we set a single new jamb. That finished door sealed tight through the next Santa Ana wind event. Call (903) 354-7134 for your free estimate and a written quote before any work starts.
Written by Owen Satterfield, Owner at Westlight Windows & Doors, serving Burbank since 2009.