Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Jupiter
Door installation in Jupiter runs anywhere from $900 for a basic steel entry door to $5,000+ for a large impact-rated French door on a custom opening, and the scoping questions that actually move that price here are different from what you’d ask in Boca or Delray. We know Jupiter’s permitting path runs through Palm Beach County rather than a city hall, that the salt air near the inlet eats aluminum hardware faster than anything inland, and that Jupiter Farms has its own set of rules around septic setbacks and unpaved access. If you’re weighing replacement doors, call (903) 354-7134 and talk to a real person who can walk you through the scope before we ever set foot on the property.

Why Westlight Windows & Doors Is Jupiter’s Preferred Door Installation Company
Westlight Windows & Doors has been installing doors since 2009 as an independently owned and operated Kingswell location, which means we answer to homeowners here, not a national franchise playbook. Owen Satterfield runs the operation the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. That last one isn’t a courtesy. It’s the 365-Day Done Right Promise, and every Jupiter customer gets it handed to them at completion in writing.
We carry eight manufacturer lines, including PGT, CGI, CWS, and Therma-Tru, so we’re not pushing one product into an opening that needs something else. Dispatch and scheduling coordinate from our Miami-area South Florida office, and our crews serve Jupiter locally with a real arrival window. When a Jupiter Farms homeowner calls about a failed jalousie door that a carrier just flagged, we know what the county’s wind-load codes require and what product approval paperwork will pass inspection. That local fluency is the difference between a quote that holds and a carrier inspection that fails.
French Door Installation in Jupiter
French Door Installation in Jupiter typically involves reframing an existing opening rather than hanging a door in a rotted jamb, because the salt-air corridor near the Jupiter Inlet corrodes what’s already there faster than in inland Palm Beach County. We’re often pulling out a failed 1990s aluminum slider or original wood frame door and setting a PGT or CGI impact-rated French unit into a reframed opening with stainless-steel hardware and marine-grade weatherstripping. A standard French door replacement on a single opening in Jupiter runs $2,500 to $5,000 installed, with the spread driven by opening width, whether the slab needs threshold work, and whether the county requires a wind-load upgrade on that particular elevation.
Because Jupiter sits outside the High Velocity Hurricane Zone, your French door needs Florida Product Approval but not the stricter HVHZ protocol. Contractors who spec HVHZ-rated units around here are charging you for compliance you don’t need, and rural homeowners who skip impact ratings entirely are creating a coverage problem they won’t discover until a carrier inspection. We match the door to the wind-borne debris region Jupiter actually falls in, nothing more, nothing less.
Where French Doors Fail in Jupiter First
The bottom corners of the side panels, where the weatherstripping meets the sill. Salt-laden air around the inlet accelerates pitting on aluminum thresholds, and once that seal starts to go, the slab wicks moisture and the jamb rots from the inside. If the door sticks in summer and won’t seal in winter, the framing has already started moving.
What a Proper Re-Set Involves
Shimming the new frame square, flashing the sill with a waterproof pan, and re-grading the exterior so sheet flow moves away from the door rather than pooling. On acreage lots, we’re also checking that the downspout on that elevation isn’t discharging into the threshold line, a common failure on older Jupiter Farms homes.
Front Door Replacement in Jupiter
Front Door Replacement in Jupiter usually gets triggered by one of three things: a rotted frame that no longer seals, a carrier inspection on an older home that flagged the existing door as non-compliant, or a homeowner who’s done with hurricane shutters and wants permanent impact-rated protection. A steel or mid-range fiberglass entry door replacement runs $900 to $1,800 in most Jupiter openings. Therma-Tru fiberglass with impact-rated glazing in a custom size can run $2,500 to $4,000 depending on width and hardware.
We replace the entire pre-hung unit, not just the slab, and we’re reframing any jamb that shows moisture damage. On eastern Jupiter homes within roughly a mile of the Intracoastal, we recommend fiberglass or marine-grade powder-coated aluminum frames with stainless-steel hardware because the chloride exposure is real and relentless. A front door with pitted hinges and a sprung jamb isn’t a maintenance problem, it’s a wind-pressure problem waiting for a storm.
The Insurance Angle on Front Doors
Carriers writing policies in Palm Beach County are checking doors on inspection now, especially on homes built before the 2001 building code updates. If your front door doesn’t have a Florida Product Approval number that matches your wind zone, you may get a non-renewal notice before you get a storm. We pull product approval docs for every unit we install and leave them with the homeowner at completion.
Entry Hardware That Survives Salt Air
We spec stainless-steel hinges, latches, and strikes rather than zinc or plated hardware on every Jupiter job within salt-air range. It’s a small material premium that adds years to the hardware before pitting sets in, and it’s one of those details you don’t see until you’ve replaced enough corroded handlesets on Jupiter Island and Canal Point.

Trusted Brands We Service in Jupiter
We install doors from PGT, CGI, CWS, and Therma-Tru, and that spread matters in Jupiter because the right product changes by location. A concrete-block ranch in Jupiter Village needs a different frame material than a custom estate in Admirals Cove, and a Jupiter Farms property with a long unpaved driveway needs a unit that won’t get damaged on the haul in. We stock common parts and hardware for these lines and can often service existing units without the wait for a full replacement. If you have a PGT or CGI door that’s out of square or a Therma-Tru entry unit that’s binding, we’re the crew that can fix it rather than just quoting a new door.
Common Door Installation Problems We See in Jupiter Homes
- Original jalousie doors and sidelights on Jupiter Farms acreage. These fail current Palm Beach County wind-load codes and are uninsurable under most carriers. We see homeowners discover this only when a carrier inspection flags the door, and the fix is a full impact-rated replacement, not a re-glaze.
- Corroded aluminum frames and hardware near the Jupiter Inlet. Within about a mile of the ocean or Intracoastal, airborne chlorides eat zinc-plated hardware and unfinished aluminum frames significantly faster than a few miles inland. We spec marine-grade materials on every coastal-facing elevation.
- Improperly shimmed doors on rural lots with poor truck access. When the install truck can’t get close to the opening because of a long unpaved driveway, some crews shortcut the shimming and the door goes out of square within a season. We stage materials properly and walk the unit to the opening rather than force a bad angle.
- HVHZ-rated doors spec’d where only Florida Product Approval is required. Jupiter falls outside the High Velocity Hurricane Zone, so a contractor quoting HVHZ units is adding cost you don’t need and potentially creating a paperwork mismatch at inspection. We match the rating to the county requirement.
Pricing for Door Installation in Jupiter, FL
Door installation in Jupiter runs these ranges: $900 to $1,800 for a standard entry door replacement, $2,500 to $5,000 for French door work on a reframed opening, and $8,000 to $25,000+ for door packages on whole-home projects or estates with multiple openings. What moves the price is opening count, whether the county requires wind-load upgrades on that elevation, the frame material (fiberglass and marine-grade aluminum run higher than standard steel), and the distance from paved road to the opening on rural lots. We hand you a written price before any work starts, and that’s the price you pay. Call (903) 354-7134 and we’ll schedule a free in-home measure and written quote.
What Door Installation Costs in Jupiter
The deep answer depends on wind zone, not just square footage. Jupiter sits in a wind-borne debris region but outside the High Velocity Hurricane Zone, so product approval requirements are real but less demanding than in Miami-Dade or Broward. A standard steel entry door on a 1960s concrete-block ranch runs about $900 to $1,400 installed. An impact-rated fiberglass Therma-Tru entry door runs $1,500 to $2,800 depending on width and glazing. French doors run $2,500 to $5,000 on the typical reframe, and full-house door packages with multiple openings start around $8,000 and climb past $25,000 on estate properties in Admirals Cove or Jonathan’s Landing. Floor height and frame material move the number more than brand. A second-floor door on a coastal-facing elevation needs a higher design pressure rating, and the NOA paperwork has to match the opening or inspection stalls. We scope all of that before quoting, so your written price reflects the door your opening actually needs. Free in-home measure and written quote, every job. Call (903) 354-7134.
Florida Pays You Back
Impact-rated doors in Jupiter qualify for several stacked incentives. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, though funding cycles and eligibility caps apply. Florida exempts impact-resistant windows and doors from sales tax at the point of purchase. The federal 25C energy credit covers 30% of product cost up to $600 per year on qualifying energy-efficient units. And after a wind-mitigation inspection (typically $75 to $150), many carriers offer windstorm-premium credits averaging around 25% on the windstorm portion of your policy. No guarantee on final numbers - programs and carriers set their own rules - but the stack is real, and we point every Jupiter customer toward the paperwork to claim it.
We Also Serve Cities Near Jupiter
Beyond Jupiter, our crews handle door installation in Palm Beach Gardens, North Palm Beach, West Palm Beach, and Palm Beach. If you’re a few miles out on PGA Boulevard or up in The Acreage, call (903) 354-7134 and we’ll confirm your address is in our service area. For a full picture of what our Door Installation team covers across South Florida, the service hub has detail on every product line and process. Locally, consider this page the straight answer for Jupiter specifically.
Serving Jupiter, FL - Our Local Coverage Area
We’re based in the Jupiter area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Jupiter
No. Jupiter falls outside Florida’s High Velocity Hurricane Zone, so your doors need Florida Building Code impact approval but not the stricter HVHZ protocol required in Miami-Dade and Broward counties. Contractors who spec HVHZ-rated units in Jupiter are adding cost you don’t need, and sometimes creating a product approval paperwork mismatch at inspection. Call (903) 354-7134 and we’ll tell you exactly which rating your opening requires.
Because original jalousie doors and 1960s-era aluminum patio units fail current Palm Beach County wind-load codes and most carriers won’t write coverage on them. Homeowners usually discover this when a carrier inspection flags the door and issues a non-renewal. Replacing those units with impact-rated doors that carry a Florida Product Approval number often clears the coverage issue. We handle the approval paperwork and leave the docs with you at completion.
Within roughly a mile of the ocean or Intracoastal, we recommend marine-grade powder-coated aluminum, vinyl, or fiberglass frames with stainless-steel hardware rather than zinc-plated hardware or unfinished aluminum. Chlorides in the air corrode those materials years faster than inland, and pitted hinges and rotted thresholds are the first failure points. Call (903) 354-7134 for a recommendation matched to your distance from the inlet.
Yes. We hand-dig or shallow-excavate threshold footings to stay clear of drainfield laterals, confirm septic tank and well setbacks before we dig, and re-grade the exterior slope so sheet flow moves away from the door sills. It changes the scope and sometimes the price, but we map the septic system before quoting so there are no surprises at the door.
We install PGT, CGI, CWS, and Therma-Tru doors, among our eight stocked manufacturer lines, and the right brand depends on where in Jupiter you live. Coastal homes tend toward PGT or CGI impact-rated units, while fiberglass Therma-Tru entry doors are common on estate lots and newer construction. We stock parts for these lines for faster service on existing units. Call (903) 354-7134 for a product recommendation on your specific opening.
Written by Owen Satterfield, Owner at Westlight Windows & Doors, serving Jupiter since 2009.










Before
After
Before
After
Before
After