Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Selma
Door installation in Selma, CA typically runs $900-$4,200 depending on whether you’re replacing a front entry door, an exterior door on a 1960s ranch, or a door on a detached shop or ADU out on county acreage. Most Selma jobs take one day once the unit is in our hands, and we stock the frames and weatherstripping that this specific climate destroys. If you’re calling from a home near the raisin packing sheds off Highway 99 or a ranch tract off Floral Avenue, we already know what your door has been through. Call (903) 354-7134 for a free estimate with the written price in your hand before any work starts.
Why Westlight Windows & Doors Is Selma’s Preferred Door Installation Company
Westlight Windows & Doors has served the Selma area since 2009 as an independently owned and operated Kingswell location, led by Owen Satterfield. We carry eight manufacturer lines, including Therma-Tru, CGI, CWS, and ECO Window Systems, so we match the product to the job rather than forcing one brand on every home. Our techs are background-checked and uniformed, and every Selma customer gets a written quote before work begins, not a verbal number that changes at the door.
Selma homeowners call us because we answer the phone. A live person picks up 24 hours a day, 7 days a week. You tell us your street, the age of the house, what the door looks like, and we schedule a visit inside a real arrival window. When Owen Satterfield’s crew shows up in Selma, they leave the job cleaner than they found it and hand you the Kingswell Guarantee in writing before they drive away.
We know this city’s housing stock: modest ranch and tract homes built from the 1950s through 1980s, most still carrying original aluminum single-pane windows and hollow-core exterior doors. Those doors were not built for Selma’s heat. We replace them right.
Front Door Replacement in Selma
Front Door Replacement in Selma usually runs $1,800-$4,200 installed, depending on whether you choose a fiberglass Therma-Tru prehung unit, a steel entry door, or an impact-rated CGI door. The job starts with removing the old slab and jamb, checking the rough opening for square, treating any corrosion or rot, then setting the new prehung unit level and plumb. On Selma’s 1950s-era ranch homes, the opening itself is often out of square from decades of valley heat pushing and pulling the framing.
Our Door Installation team handles every step, from removing the old door to hauling debris away. You get fresh perimeter caulk, new weatherstripping, and a door that actually seals. We do not hang a new slab on a corroded jamb and call it done.
Fiberglass Entry Doors
Fiberglass entry doors made by Therma-Tru are the most common front-door choice we install in Selma. They hold their shape through weeks above 100°F, they do not swell like wood, and they take paint well. Most Selma homeowners pair them with a laminated glass insert for light without sacrificing security.
Impact-Rated Front Doors
For homes on the western edge of Selma or out near open vineyard acreage where wind and storm debris are a concern, we install impact-rated CGI and CWS doors. These meet Miami-Dade standards and add a real structural upgrade, not just a cosmetic refresh.
Door Replacement in Selma
Door Replacement in Selma covers any exterior door that is not your front entry: side doors, back doors, garage-to-house doors, shop doors, and door slabs on detached ADUs or outbuildings. Basic slab-only replacement runs $900-$2,200, while a full prehung unit with frame replacement runs $2,200-$3,800, depending on size and hardware. On older Selma ranch homes, the perimeter seal is usually the first thing to fail, not the slab itself.
Sulfur dioxide from the raisin packing and dehydrating sheds near downtown Selma and along Highway 99 attacks aluminum jambs and weatherstripping. We see doors that look fine from ten feet away but have a chalky white oxidation film on the jamb and crumbling foam-backed weatherstripping once we pull the casing. Replacing the slab alone on that opening is a waste of money. We treat the frame first.
Slab-Only Door Replacement
A slab-only swap works when your existing jamb is square, stable, and free of corrosion. We mortise new hinges, cut for the existing latch, and hang the new slab in the old opening. In Selma, this usually applies to back doors on homes built after 1990 or doors that do not face the dominant southeast wind carrying field compounds.
Full Prehung Replacement
A full prehung replacement means pulling the old door and jamb down to the rough framing, then setting a new unit with fresh insulation, caulk, and weatherstripping. On Selma’s older homes, this is the most common path. The rough opening gets squared, the jamb gets primed or replaced, and the new door seals tight against both valley heat and winter tule fog.
Trusted Brands We Service in Selma
We stock and install doors from Therma-Tru, CGI, CWS, and ECO Window Systems, among our eight manufacturer lines. That means a Selma customer who wants a fiberglass front door is not stuck with whatever one brand offers. We keep common slab sizes, prehung units, and hardware in local inventory so turnaround is fast. If you have a specific brand preference, tell us when you call and we’ll confirm availability before the estimate, not after.
Common Door Installation Problems We See in Selma Homes
- Chalky white oxidation on aluminum jambs: Sulfur compounds from Selma’s raisin vineyards and packing sheds attack aluminum frames at the molecular level. The jamb develops a white, pitted film, and the door loses its seal within a couple of seasons if the frame is not treated or replaced.
- Crumbled foam-backed weatherstripping: The same sulfur compounds break down the foam and adhesive in older weatherstripping, especially on doors facing the packing operations near downtown Selma. You can test this yourself: run a finger along the jamb and see if the strip flakes off like dry sand.
- Out-of-square rough openings from valley heat: Weeks of 100°F-plus temperatures push and pull framing over decades. A 1950s ranch door opening in Selma is rarely square, which is why a straight slab drop-in often binds at one corner or gaps at another.
- Tule-fog moisture intrusion every winter: Dense winter fog penetrates any compromised perimeter caulk and rots the sub-sill and rough framing. By the time you see a soft threshold or a warped door bottom, the damage often extends several inches into the framing.
Pricing for Door Installation in Selma, CA
Here are the honest ranges for Selma’s market:
- Slab-only exterior door replacement: $900-$2,200
- Full prehung front door replacement with fiberglass unit: $1,800-$4,200
- Full prehung side or back door replacement: $2,200-$3,800
- Impact-rated entry door (CGI or CWS): $2,800-$4,500+
- Frame treatment or jamb replacement add-on: $250-$750
What changes the price: the size of the unit, whether we replace the jamb or just treat it, hardware selection, and whether the door is on county acreage with a longer material haul and restricted equipment access. You get a written line-item quote before any work starts. No revised invoices at the door. Call (903) 354-7134 for your free estimate.
Door Installation on Selma Acreage: What Changes
Westlight Windows & Doors serves Door Installation in Selma customers on both city lots and county acreage, and the two jobs are not the same. On a city parcel, a door replacement is straightforward. On acreage outside city limits, four things change the scope and the price before we ever touch a hinge.
First, permitting. Inside Selma city limits, the city handles permits. Outside the city, Fresno County takes over, and that means setbacks for wells and septic systems dictate where doors on outbuildings, shops, and detached ADUs can even go. We pull the permit and schedule the inspection, whether it is the city or the county.
Second, the material haul. A door delivery to a ranch off Nebraska Avenue or a property past Fowler takes longer and costs more than a delivery to a tract home near Selma High. We factor that into the written quote, not as a surprise add-on later.
Third, equipment access. An unfinished lot or a long driveway off a county road means our installers may need to stage materials at the curb and walk them in. That changes labor time. We scope it before quoting.
Fourth, outbuildings and detached ADUs. A shop door on Selma acreage is not just a door. It often needs thicker framing, different hardware for a wider slab, and weather sealing that stands up to open-field wind and sulfur drift from the surrounding raisin country. We price those jobs as their own scope, not as a standard residential door with a bigger number.
We Also Serve Cities Near Selma
Our crews serve Selma and the surrounding communities of Selma-area neighbors: Fowler, Parlier, Kingsburg, and Reedley. If you are on acreage between any of these towns, we cover the haul and the permitting. One call to (903) 354-7134 covers the whole area.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Selma
The white, pitted film on your aluminum jamb is sulfur-compound corrosion from Selma’s raisin vineyards and packing sheds. The sulfur-based fungicides sprayed on surrounding vineyards and the sulfur dioxide emitted during raisin processing oxidize aluminum frames far faster than in Fresno or Clovis. Your neighbor’s door is likely vinyl or fiberglass, which resists that chemical attack. The fix is to treat or replace the jamb, not just hang a new slab. Call (903) 354-7134 and we’ll inspect the frame before quoting.
Outside Selma’s city limits, Fresno County governs permits, and that matters more than most homeowners expect. County review includes well and septic setbacks, which can affect where a door on a detached shop or ADU is placed. We pull the permit, coordinate the inspection, and pass the paperwork through to you. Inside Selma city limits, the city handles it, and the process is usually faster. Either way, we handle it.
An outbuilding door changes the quote in three ways: the slab is often wider or taller than a standard residential door, the framing may need reinforcement, and the longer material haul plus equipment access across an unfinished lot adds labor. If the building is within county septic or well setback zones, that affects placement and permits. We scope all of that during the estimate, so the written price includes it. Call (903) 354-7134 for a free site visit if you have acreage.
Yes, and the savings show up fastest on Selma’s older homes. A hollow-core 1960s exterior door with failing weatherstripping leaks conditioned air all summer. A properly sealed Therma-Tru fiberglass door with fresh perimeter caulk and a tight jamb stops that air leak, and on a house that sustains multiple weeks above 100°F, that is a measurable difference. Your exact savings depend on your HVAC system and insulation, but the door is a real part of the envelope. We can also check your surrounding weatherstripping while we’re there.
We install doors from Therma-Tru, CGI, CWS, and ECO Window Systems, plus other brands from our eight manufacturer lines. For Selma’s ranch homes, fiberglass Therma-Tru units are the workhorse. For impact-rated needs on open acreage or west-facing exposures, we use CGI and CWS. For energy-focused applications, ECO Window Systems offers strong thermal performance. Tell us your property type when you call (903) 354-7134 and we’ll match the brand to the job.
Ready to replace that door the right way? Call (903) 354-7134 today. Owen Satterfield and the Westlight Windows & Doors team will give you a free, written estimate with the price locked in before any work begins. The Kingswell Guarantee covers every Selma job: written price before work, a real arrival window, a clean job site, and a written guarantee on the completed work. If it is not right within the guarantee period, we come back and fix it at no charge. That is the Kingswell Way.
Written by Owen Satterfield, Owner at Westlight Windows & Doors, serving Selma since 2009.