Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindow Company in Florence-Graham, CA
Window and door work in Florence-Graham carries a set of realities that most contractors don’t plan for until they’re standing in your driveway. The housing stock here runs almost entirely to 1940s-to-early-1960s bungalows and duplexes with original steel-frame or jalousie windows, and nearly every home has ornamental wrought-iron security bars and a decorative iron screen door that has to come off and go back on exactly as it was. Add unincorporated LA County permit routing and inland summer heat that bakes glazing compound to dust, and you have a job that rewards a crew who’s done it before. Westlight Windows & Doors handles window replacement, window installation, and door installation across Florence-Graham, with written pricing before any work starts. Call (903) 354-7134 to talk through your project.
Why Florence-Graham Homes Are Different
Florence-Graham is unincorporated Los Angeles County, so every window and door permit routes through LA County Building & Safety, not a city hall. That affects two things: Title 24 energy-compliance inspections follow county approval timelines that differ from what contractors quote in neighboring incorporated cities like Huntington Park or Compton, and anyone who has pulled permits only in city jurisdictions will learn the differences on your clock. We plan for county review windows from the first site visit.
The homes themselves present their own set of conditions. Most of Florence-Graham’s residential blocks are small single-family bungalows and duplexes built between the 1940s and early 1960s. Original steel-frame and jalousie single-pane windows are still common, and decades of deferred maintenance mean deteriorated glazing compound and non-standard rough openings that complicate any drop-in replacement with modern vinyl units. Wood door frames often show dry rot at the sill, which means sill repair or full buck replacement before a new door unit can be hung. The inland heat is another factor: Florence-Graham sits far enough from the coast that summer highs regularly run 10 to 15 degrees hotter than coastal neighborhoods, accelerating seal failure on existing dual-pane units and causing steel-frame windows to stick and wood exterior doors to bind by midsummer. That heat also makes Title 24 low-E dual-pane compliance something you feel every month on the electric bill, not just a box to check for the inspector.
Our Main Florence-Graham Services
These are the three jobs Florence-Graham homeowners call us about most often, and each one has its own page with full pricing, process, and what to expect in this specific housing stock.
Window Replacement in Florence-Graham
Window replacement here means working around the ironwork. Most Florence-Graham homes have custom-fitted ornamental security bars on every window, and those bars have to be removed, labeled, stored, and reinstalled exactly as found, or the homeowner will not sign off on the job. Beneath the bars, crews usually find original steel-frame or jalousie windows with deteriorated glazing compound and rough openings that are not square, which means the replacement often includes reframing the opening rather than a simple swap. We carry low-e dual-pane options that meet Title 24 and hold up to the inland heat. Window Replacement in Florence-Graham
Window Installation in Florence-Graham
Installation on new-construction or addition work in Florence-Graham has its own set of ground rules: LA County has permitting jurisdiction here, so every rough opening gets inspected by county Building & Safety on county timelines. Thermal expansion from the inland heat means we flash and seal for movement, not just for water, and we order units sized for the actual rough opening rather than the nominal dimension. For homes adding a bedroom or converting a garage, Title 24 low-E dual-pane is the floor, not the ceiling. Window Installation in Florence-Graham
Door Installation in Florence-Graham
Most Florence-Graham entries have a decorative iron security screen door mounted in front of the main door, and replacing the door without disturbing that iron is a two-trade job. Behind the screen door, the wood frame is usually original to the house, and dry rot at the sill is common enough that we quote sill repair as a standard part of door installs here rather than a surprise add-on. We hang Therma-Tru and other entry units true to the opening, with weatherstripping rated for the inland summer heat that makes doors bind. Door Installation in Florence-Graham
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Florence-Graham
Westlight carries eight manufacturer lines, and the ones we lean on most for Florence-Graham work are PGT and CGI for impact-rated units, ECO Window Systems for Title 24 energy compliance, and Therma-Tru for entry doors. Stock and lead times vary by line. See our brands for the full list and what each one is best suited for.
Pricing for Window Company in Florence-Graham, CA
| Service | Typical range in Florence-Graham |
|---|---|
| Single window replacement (standard vinyl, low-e dual-pane) | $850 - $1,400 installed |
| Steel-frame window replacement (reframed rough opening) | $1,200 - $2,100 installed per opening |
| Jalousie window replacement with framing repair | $950 - $1,700 installed per opening |
| Remove and reinstall ornamental iron window bars | $150 - $350 per opening (billed with the window work) |
| New-construction window installation | $400 - $900 per opening, labor and flashing only |
| Entry door replacement (standard prehung) | $1,300 - $2,400 installed |
| Entry door with sill repair | $1,800 - $3,200 installed |
| Security screen door removal and reinstallation | $150 - $300 per door |
| Dry rot buck replacement | $400 - $900 per opening |
| Title 24 low-e upgrade (whole house, 6-8 openings) | $6,500 - $12,000 installed |
What pushes price up in Florence-Graham is almost always the ironwork and the framing rot: removal and reinstallation of security bars and screen doors is real labor, and wood sill or buck repair is common enough that we line-item it rather than bury it. Every quote is written, and the price you approve before work starts is the price you pay.
Neighborhoods We Serve in Florence-Graham
We work the whole unincorporated Florence-Graham area, from the blocks along Alameda Street east toward Compton and from Slauson Avenue south past Gage. Response time across the area is typically next-day for estimates and one to three weeks for scheduled installs, depending on product lead times.
- Graham
- Florence
- Central Florence-Graham, near the Alameda corridor
- East Florence-Graham, bordering Watts
- North Florence-Graham, near Slauson Avenue
Service Area – Cities Near Florence-Graham
Our crews cover Florence-Graham and the surrounding LA basin. We also work in Los Angeles, CA, serve customers throughout San Diego, CA, take window and door jobs in San Jose, CA, and schedule work in San Francisco, CA. Call (903) 354-7134 and we’ll tell you straight whether we can get a crew to your street.
Serving Florence-Graham, CA - Our Local Coverage Area
We’re based in the Florence-Graham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Company in Florence-Graham
Usually yes. Florence-Graham is unincorporated LA County, so window and door permits go through LA County Building & Safety, not a city hall. Replacement of like-for-like units may be exempt in some cases, but anything involving reframed rough openings, new-construction work, or structural door replacement typically needs a county permit. We handle the paperwork and know the county review timelines.
Most single-opening replacements are done in a day; whole-house window replacement with iron bar removal and reinstallation typically runs two to four days. County inspection scheduling for new-construction or reframing work adds time that city-permit jobs don’t carry. We give a written arrival window and a written schedule before work starts. Call (903) 354-7134 for a specific timeline on your project.
Yes, that’s standard practice on our Florence-Graham jobs, not an add-on. We remove, label, store, and reinstall ornamental iron window bars and security screen doors as part of the quote, and we treat the reinstalled ironwork as part of the finished job: if it doesn’t go back the way it came off, we make it right at no charge.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Florence-Graham Customers Say
"Our energy bill in summer was brutal. New windows made a real dent in it. Salesman wasn't pushy and didn't do the fake "today only" discount thing the others tried."
- Bethany Oh"Two bedroom windows that never opened and one that wouldn't stay up. All replaced in an afternoon. The crew was clean, hauled off the old frames, and the quote held."
- Colette Rhee"Got quotes from three companies. Westlight wasn't the cheapest but they were the only one who measured everything carefully and put it all in writing. Worth it. No surprises on install day."
- Craig Dillard