Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Window Company in Murrieta, CA
Westlight Windows & Doors handles window replacement, window installation, and door installation across Murrieta, CA. The work here has a rhythm all its own: thousands of late-1990s and early-2000s tract homes, built in a short burst and now hitting the same 20 to 30 year mark at the same time, with builder-grade vinyl windows and sliding doors that don’t hold up to inland heat the way coastal homes do. If you’re seeing fogged glass or a sliding door that fights you, call (903) 354-7134 and we’ll give you a written price before any work starts.
Why Murrieta Homes Are Different
Murrieta’s housing stock is unusually uniform. National builders like Lennar, KB Home, and Shea Homes put up thousands of stucco-and-tile-roof homes between roughly 1998 and 2008, and most of them went in with the same tier of builder-grade vinyl windows and dual-pane glass. Those products were never designed for Murrieta’s summer highs above 100°F. Add the Santa Ana winds that push through the I-15 corridor in the fall, and you get thermal cycling and lateral pressure that blow dual-pane seals far faster than you’d see in Carlsbad or Oceanside, just 45 minutes west.
What this creates is neighborhood-scale failure. Entire gated communities like Bear Creek and Greer Ranch are reaching end of life on their original windows and sliding doors in the same few-year window. Homeowners see fogging between panes, vinyl frames that warp in afternoon heat, and sliding door rollers that bind or skip. When one house on a street needs the work, the odds are high that six more on the same block are close behind.
Our Main Murrieta Services
Most Murrieta homeowners call us for one of three things: replacing windows that have failed, installing new construction windows during a remodel or addition, or swapping out doors that no longer seal or slide properly. Each service has its own Murrieta page with local pricing and specifics.
Window Replacement in Murrieta
The typical Murrieta replacement is a dual-pane vinyl window with a blown seal or a frame that’s started to sag. We pull the old unit, inspect the rough opening for dry rot or settling, and install the new window with fresh flashing to handle inland heat and Santa Ana-driven rain. We carry impact-rated lines like PGT and CGI for homeowners in wind-exposed areas near the I-15 corridor. The full breakdown is on our Window Replacement in Murrieta page.

Window Installation in Murrieta
New construction and addition work in Murrieta moves fast, and builders need windows that arrive on schedule and install clean. We work with general contractors and homeowners on projects from single-room additions to full custom builds, and we stock energy-efficient lines like ECO Window Systems for Title 24 compliance. Every install gets a written price before rough-in begins. See the Window Installation in Murrieta page for what to expect.

Door Installation in Murrieta
Murrieta’s oversized sliding glass doors take a beating from wind, sun, and hard water from the irrigation that runs against foundation lines. We replace builder-grade sliders with sturdier systems, and we reframe and hang entry doors from brands like Therma-Tru when swelling or settling has thrown the threshold out of square. Details and pricing are on the Door Installation in Murrieta page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Murrieta
We install from eight manufacturer lines, and in Murrieta we lean on CGI and PGT for impact-rated work, ECO Window Systems for energy compliance, and ES Windows for large-format and modern designs. Parts and hardware for common Murrieta-era products are stocked locally, not shipped across the country. See our brands for the full list.
Pricing for Window Company in Murrieta, CA
| Service | Typical range in Murrieta |
|---|---|
| Single window replacement (vinyl, standard size) | $600 - $1,250 installed |
| Single window replacement (wood or fiberglass) | $900 - $1,800 installed |
| Sliding glass door replacement | $1,500 - $3,500 installed |
| Entry door replacement (steel or fiberglass) | $1,200 - $3,000 installed |
| Window installation in new construction (per opening) | $400 - $900 labor |
| Full-home window replacement (10-14 windows) | $8,000 - $16,000 installed |
| Dual-pane glass replacement (no frame) | $250 - $600 per sash |
| Sliding door roller and track repair | $200 - $450 |
What pushes a Murrieta job higher than these ranges is usually the opening condition: 2000s-era tract homes often have settled rough openings that need re-shimming or minor structural cleanup before the new unit goes in. You’ll know the exact number before we order anything, because every Murrieta job gets a written price before work begins, and that price doesn’t change at the door.
Neighborhoods We Serve in Murrieta
We work across the full city, and we’re familiar with the HOA design-review rules that apply in several Murrieta communities, which can affect exterior door and window styling.
- Bear Creek
- Greer Ranch
- Copper Canyon
- Mapleton
- Central Murrieta
For most neighborhoods, we can schedule an estimate within a few days of your call.
Service Area – Cities Near Murrieta
Beyond Murrieta, our crews cover the surrounding southwest Riverside County communities, including Temecula, CA, Menifee, CA, Wildomar, CA, and Lake Elsinore, CA.
Serving Murrieta, CA - Our Local Coverage Area
We’re based in the Murrieta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Company in Murrieta
In many Murrieta gated communities, yes, exterior changes require design review. We can’t file the paperwork for you, but we can give you the product specs and finish samples your HOA will ask for, which usually speeds things along.
Most estimates can be scheduled within a few days. Installation lead times depend on what we’re installing: stock vinyl windows often go in within two to three weeks, while custom or impact-rated orders from lines like CGI can stretch longer.
When a permit is required, we pull it and handle the inspection. Basic same-size replacements usually don’t need one, but changes to opening sizes or structural headers always do. The written estimate will tell you exactly what applies to your job. Call (903) 354-7134 to get one started.
Call Westlight Windows & Doors at (903) 354-7134 for a free, written Murrieta estimate on any window or door project.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Murrieta Customers Say
"Got quotes from three companies. Westlight wasn't the cheapest but they were the only one who measured everything carefully and put it all in writing. Worth it. No surprises on install day."
- Craig Dillard"Our sliding patio door had come off its track years ago and we just lived with it. New one is smooth as butter. They hauled off the old one and vacuumed up before they left."
- Jessica Landry"Replaced eight drafty old windows that were basically single pane. The house is warmer already and the street noise is way down. Crew was on time both days and the price was exactly the quote."
- Harold Bemis










Before
After
Before
After
Before
After