Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Temple City
Window installation in Temple City, CA runs $850-$2,400 per opening for most replacement work, with bay and bow units starting around $3,800 installed. Westlight Windows & Doors has been installing windows since 2009, and we know what Temple City’s 1950s-60s ranch homes throw at you: non-standard rough openings, corroded aluminum tracks, and west-facing glass that bakes in San Gabriel Valley heat. When you call (903) 354-7134, you’ll reach a live person who can talk through your project and schedule a free estimate. We coordinate every Temple City job from our Los Angeles office, with local crews who know these streets.
Why Westlight Windows & Doors Is Temple City’s Preferred Window Installation Company
Our Window Installation team works on Temple City homes every week. We know the difference between a 1949 stucco bungalow near Live Oak Park and a 1968 ranch east of Rosemead Boulevard. The rough openings aren’t square. The stucco returns are inconsistent. The original aluminum frames have been painted over twice. None of that phases our installers, because we see it on nearly every job here.
Owen Satterfield, who leads Westlight, built the company’s reputation on showing up when we said we would and putting every price in writing before a single screw turns. That matters in Temple City, where half our customers have been burned before: a crew that ghosted, a door price that jumped, a seal that failed within a year. We hand every homeowner a written Kingswell Guarantee at job completion. If the work isn’t right within 365 days, we come back and fix it at no charge. That’s not a pitch. It’s the same document we’ve handed to customers in Temple City for years.
Bay Window Installation in Temple City
Bay window installation in Temple City is one of the most impactful upgrades we do on the original ranch homes that line streets like Oak Avenue and Primrose Avenue. These houses were built with narrow double-hungs or aluminum sliders facing the street, and a bay window changes the whole front room: more daylight, a wider sight-line, and a built-in shelf for whatever the family actually uses. Most bay installations here run $3,800-$7,200 installed, depending on the seat board depth and whether we’re matching existing stucco or reframing around a non-standard opening.
Custom Sizing for 1950s-60s Stucco Ranches
Bay windows in Temple City almost never come off the shelf. The rough openings on mid-century ranches are rarely the standard 36-inch or 48-inch widths that stock units assume. We measure every opening, then order custom or cut-down units from our manufacturer lines, which means a 6-10 week lead time on most bay projects. Owen will tell you the same: lead times set the calendar here, not labor.
Fixed Written Pricing Before You Order
We write your bay window price down before ordering anything. The number covers the unit, the reframing if needed, the flashing, the interior trim, and the finish work. If we uncover rot or framing damage, that’s a conversation with a written addendum before we proceed, never a surprise on the invoice. Temple City homeowners get the exact price for their bay window labor and materials, in writing, before the first lead time even starts.
Window Contractor in Temple City
Hiring a window contractor in Temple City means finding someone who won’t cut corners on flashing, square, or sealant - or you can skip the search and call our Window Replacement in Temple City team directly. We’re that contractor. Every Temple City installation we do includes new flashing, a level set, backer rod where the stucco returns are uneven, and a full sealant pass with products rated for San Gabriel Valley sun exposure. Typical single-window replacement here runs $850-$2,400 installed, with sliders and casements at the lower end and bay, bow, or triple-pane work at the top.
Working With Your Designer or Architect
Many Temple City remodels involve a designer or architect, and we coordinate directly with them on sash profiles, mullion spacing, and hardware finish. If your drawings call for a specific ViewLux or CWS product line, we’ll match it and order to spec. Owen reviews every job file before we order, so the units that arrive are the units your designer specified.
The 365-Day Done Right Promise
Every Temple City job carries our written Promise: if the work isn’t right within a year, we come back and make it right at no charge. We also include a free second visit if a repair fails. That’s how a window contractor should stand behind their work in this city. Call (903) 354-7134 to start with a free estimate.
Trusted Brands We Service in Temple City
Westlight installs eight manufacturer lines, and for Temple City’s heat and sun exposure we lean on PGT, CGI, and ViewLux products most often. PGT and CGI offer impact-rated glass that handles both summer glare and Santa Ana wind loads. ViewLux gives us clean architectural profiles that fit well on Temple City’s mid-century and newer homes alike. Because we order direct from these manufacturers, we get correct sizing for non-standard openings and no substitute-product shuffle. When your job needs a specific Low-E glass package or a custom mullion, we order it. You know exactly what you’re getting, because it’s in the written line-item quote before we order anything.
Common Window Installation Problems We See in Temple City Homes
- Failed seals on original aluminum sliders. Temple City’s summer afternoons hit 100-105°F, 15-20° hotter than coastal LA. That heat load breaks down 60-year-old glazing seals fast, turning west- and south-facing rooms into ovens and fogging the glass between panes where a retrofit once was.
- Non-standard rough openings. Most Temple City homes were built between the late 1940s and early 1970s, and the window rough openings were framed to whatever was on the truck that week. Stock replacement units won’t fit. We measure and order custom or cut-down sizes, which is why lead times on this work run 6-10 weeks, not days.
- Corroded aluminum tracks and worn pile weatherstripping. The original aluminum sliding doors and windows on these homes have tracks that corrode under decades of heat and irrigation overspray. The pile weatherstripping disintegrates. Air leaks through, and the window stops sliding smoothly. We see this on nearly every original unit in Temple City.
- Clogged weep holes and sill leaks on 1960s patio doors. East-facing rear patios along Oak Avenue and Primrose Avenue still have original 1960s aluminum sliding glass doors. During winter rain storms, the weep holes clog with decades of dirt and the water backs up into the sill and then into the house. It’s a failure mode we know by heart here because we’ve fixed it dozens of times.
Pricing for Window Installation in Temple City, CA
Window installation pricing in Temple City breaks down like this: a standard single-hung or slider replacement runs $850-$1,600 per unit. Double-hungs and casements run $1,200-$2,400. Bay and bow windows start at $3,800 and climb with size and reframing. Garden windows land between $2,400 and $4,200. What changes the number? The unit size, the glass package (Low-E insulated glass is standard on most Temple City jobs because of the heat), the condition of the existing frame, and whether we’re matching stucco or doing custom trim. We give every Temple City homeowner a written, line-item price before any work begins. Call (903) 354-7134 for your free estimate.
We Also Serve Cities Near Temple City
Westlight crews serve the surrounding San Gabriel Valley, including El Monte, San Gabriel, Arcadia, and Rosemead. If you live in one of those cities, the same written pricing, the same Window Installation in Temple City expertise, and the same Kingswell Guarantee apply. We schedule a real arrival window and show up.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Temple City
Most Temple City homes were built between roughly 1948 and 1972, and the original window rough openings were not framed to today’s standard stock sizes. Contractors in that era built to the plans on hand, and no two openings from different crews are exactly alike. When we measure a Temple City home, we frequently find openings that are 1/2-inch to 2 inches off from any stock unit. We order custom or cut-down replacement windows to fit the actual jamb dimensions. That’s the right way to do it, and it’s also why our Temple City lead times run 6-10 weeks rather than days. Call (903) 354-7134 and we’ll measure your openings and give you a written price.
Yes, and in Temple City specifically it makes a bigger difference than on the coast. Summer afternoons here hit 100-105°F, and the San Gabriel Mountains trap that heat over the valley. Low-E glass (a thin coating that reflects solar heat back out in summer) cuts solar heat gain through your windows by 30-50% compared to the original single-pane aluminum frames most Temple City homes still have. That means your AC doesn’t fight the west-facing glass all afternoon. The payoff is greatest on west- and south-facing windows, which are exactly what we replace most often on Oak Avenue and Primrose Avenue ranches. For an exact quote on Low-E units for your home, call (903) 354-7134.
Your weep holes are clogged, and the original pile weatherstripping is shot. On 1960s aluminum sliding doors, the weep holes are small slits at the bottom of the outer track that drain water back to the exterior. After 50-plus years, they fill with dust, pollen, and corrosion, and winter rain backs up behind the track and spills into the sill and then your floor. We see it repeatedly on east-facing rear patios along Oak Avenue and Primrose Avenue during SGV rain storms. The proper fix is usually a new Therma-Tru or ViewLux patio door sized to your existing opening. Call (903) 354-7134 for a free assessment and written quote.
We write the full price down before we order anything. That means the window units, the flashing, the sealants, the trim, the labor, the cleanup, everything. If we find hidden damage after opening a wall, we stop, show you what we found, and give you a written addendum before we continue. On high-end Temple City work, where custom ViewLux or PGT units and long lead times are common, you’ll know the total cost before the 6-10 week order clock even starts. Owen Satterfield reviews every Temple City job file personally. The price you sign is the price you pay. Call (903) 354-7134 to get your written estimate started.
Yes, and we do it regularly on Temple City remodels. We’ll take your designer’s or architect’s spec and order the exact products: the sash profile, the glass package, the mullion spacing, the hardware finish. If your drawings call for PGT impact-rated units or CWS architectural glass, we’ll match them. We communicate directly with your design team so you don’t have to translate between the plan set and the window order. Our crews are background-checked and uniformed, so when someone walks through your door, you know exactly who they are. Call (903) 354-7134 to schedule your free estimate.
Get Your Temple City Window Installation Estimate
Westlight Windows & Doors has been installing windows since 2009, and we treat every Temple City home like our own. You get a written price before any work starts, a committed arrival window, a clean job site, and a written guarantee when the job is done. If the work fails within 365 days, we come back and fix it at no charge. No negotiation, no chasing us down. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. Call (903) 354-7134 to schedule your free estimate in Temple City today.
Written by Owen Satterfield, owner at Westlight Windows & Doors, serving Temple City and the San Gabriel Valley since 2009.