Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Upland
Upland Window Replacement typically runs $450-$1,200 per opening for standard vinyl retrofit work, while full-frame replacements in older homes run $900-$2,400 depending on framing condition, stucco repair, and permit requirements. Most jobs are completed in one to three days once materials arrive. If you live north of Foothill Boulevard, you already know the canyon winds make a poorly installed window impossible to ignore. Call (903) 354-7134 to schedule your free estimate. We’ll give you a written price before any work starts.
Why Westlight Windows & Doors Is Upland’s Preferred Window Installation Company
We’re an independently owned and operated Kingswell location, founded in 2009, and led by Owen Satterfield. Upland homeowners call us because we show up in the window we gave, leave the job site cleaner than we found it, and put every promise in writing. The Kingswell Guarantee means four things on every single project: a written price before any work starts, a committed arrival window, a clean job site, and a written guarantee on the completed work. If a repair fails within 365 days, we come back and fix it at no charge. Our techs are background-checked and uniformed, so you know exactly who’s walking through your door. And when you call us at (903) 354-7134, a live person answers, 24/7. Not a voicemail box, not a chatbot.
Our Window Installation team works throughout Upland and the surrounding foothill communities, coordinated from our Inland Empire office. We know the difference between a 1920s Craftsman bungalow off Euclid Avenue and a 1970s ranch house near Mountain Avenue. That local knowledge changes how we size, flash, and finish every window.
Window Installers in Upland
Window installers in Upland do more than swap glass. They diagnose why the old unit failed, inspect framing and waterproofing behind the stucco, and make sure the replacement handles what Upland’s climate throws at it. You need a real installer when a window fogs, sticks, rattles, or leaks, or when a failed seal is driving up your cooling bill through a July that never seems to drop below 90°F. Standard single and double hung window installation in Upland runs $450-$950 per opening. Full-frame replacement on a corroded aluminum original runs $900-$1,800.
Single & Double Hung Windows
These are the workhorses of Upland’s ranch-era housing stock. A well-installed double hung gives you ventilation control on days when the morning starts at 45°F and the afternoon hits 100°F, which is about half the year in Climate Zone 10. Expect $450-$850 per opening for retrofit work.
Horizontal Roller & 3-Panel Sliding Windows
Original aluminum sliders from the 1960s-1980s are the most common window we pull out of Upland homes. Their frames corrode from decades of thermal expansion and contraction. A new horizontal roller or 3-panel sliding unit with low-E glass and a properly flashed opening runs $700-$1,900 installed, depending on size and whether the stucco needs repair around the new frame.
Casement Windows in Upland
Casement windows in Upland earn their keep because they crank shut against a compression seal, which is exactly what you want when downslope winds come out of San Antonio Canyon and find every gap in the house. North-of-Foothill homeowners choose casements more than any other style because they seal tighter than sliders or double hungs under wind load. A standard casement window in Upland runs $600-$1,200 installed; larger units with impact-rated glazing run $1,200-$2,400.
Awning & Hopper Windows
We install these in bathrooms, laundry rooms, and basement-level utility spaces where a casement or slider doesn’t fit. They vent well and, when closed, create a solid compression seal. Most run $450-$800 per opening.
Picture & Fixed Windows
These are for views of the San Gabriels and light, not ventilation. The trade-off is that a fixed unit must be flashed perfectly because there is no operable sash to hide a poor install. Installed prices run $500-$1,400 depending on glass package and frame material.
Trusted Brands We Service in Upland
We carry eight manufacturer lines, including PGT, CGI, and CWS, so the right product gets matched to the job rather than the job forced to fit one brand. PGT impact-rated casements are a common choice for foothill homes facing winter wind events. CGI and CWS give us solid options for large fixed and sliding units where structural strength matters. Because we stock local parts and coordinate from our Inland Empire office, Upland customers see faster turnaround on orders and warranty follow-up than they would through an out-of-area shop.
Common Window Installation Problems We See in Upland Homes
- Whistling and rattling during winter downslope winds. San Antonio Canyon channels wind hard enough to expose installation gaps that a flatland installer in Ontario never has to worry about. We flash and seal north-of-Foothill openings to canyon-wind standards, not valley defaults.
- Fogged glass and failed insulated glass units. Upland’s day-to-night swing stresses dual-pane seals faster than coastal or low-desert climates. When the factory seal fails, moisture gets in, and the glass fogs permanently.
- Corroded aluminum frames from the 1960s-1980s. Original single-pane sliders lose their structural integrity after decades of thermal cycling. By the time you see the white oxidation, the frame is often too warped to accept new glass.
- Rotted or missing waterproofing behind the stucco. Open up an older Upland home and you’ll often find no membrane at the rough opening. Water that should have drained away soaks into framing instead. We write framing and flashing allowances into the contract before we open anything.
Pricing for Window Installation in Upland, CA
A single standard vinyl window in Upland runs $450-$850 installed as a retrofit. Full-frame replacement with stucco repair and new flashing runs $900-$2,400 per opening. What moves the number: whether the existing frame is salvageable, whether your home is in a historic district like the Tree Streets along Euclid where proportions must be preserved, and what a permit inspection requires once walls are open. We write every allowance into the contract after a pre-inspection, so any surprise, rotted framing, outdated wiring, missing waterproofing, gets priced and approved in writing before we touch a jamb. Call (903) 354-7134 for your free written estimate.
We Also Serve Cities Near Upland
Westlight Windows & Doors serves Window Installation in Upland and the foothill communities around it, including Rancho Cucamonga, Claremont, Montclair, and Ontario. If you’re one town over and tired of waiting on a contractor who won’t return calls, call (903) 354-7134. We answer, and we show up.
Serving Upland, CA - Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Upland
Yes, in most cases. Upland requires a building permit for window replacement, especially when the opening is being altered. A permit triggers code upgrades for anything the inspector can see once walls are open: undersized headers, missing waterproofing, outdated wiring in the wall cavity. We pull permits, schedule inspections, and write allowance line items into your contract so the final price does not move without your written sign-off. Call (903) 354-7134 for an exact quote.
Because San Antonio Canyon acts like a wind tunnel. Downslope wind events funnel through the canyon and hit foothill neighborhoods north of Foothill Boulevard with far more force than flatland cities like Ontario experience. Installers who treat Upland like any valley city leave gaps that become whistling failures by December. We flash and seal against canyon-wind pressure specifically.
Upland sits in California Climate Zone 10, which means Title 24 requires glass that controls solar heat gain through 100°F summers. That usually means low-E coatings (a thin layer that reflects heat back out in summer and back in during winter) and a U-factor low enough to handle the day-to-night swing. We stock ECO Window Systems and other energy-efficient options that meet Zone 10 thresholds. Call (903) 354-7134 and we’ll walk you through the glass packages that actually comply.
We find them before we open anything. On a 1968 ranch home off Mountain Avenue, our crew pulled original aluminum sliders showing corroded frames and failed seals; once walls were open, we found undersized headers and no waterproofing membrane at the rough openings. We had already written framing and flashing allowances into the contract after the pre-inspection, so when we discovered the rot, the fix was priced and approved in writing before we touched a single jamb. That is how every Upland project works.
They will, provided the frames are insulated and flashed properly. Upland’s elevation at the base of the San Gabriels means hot afternoons fall into cool mountain-air evenings fast. That swing is what kills vinyl frames and dual-pane seals prematurely. A properly installed window with low-E glass and a tight frame slows heat transfer both ways and stops the expansion-contraction cycle from working against the seal. Call (903) 354-7134 to schedule your free estimate. The price you get in writing is the price you pay.
Written by Owen Satterfield, Owner at Westlight Windows & Doors, serving Upland since 2009.